Yandex MC
Elsa online. ElsaWin. ElsaWeb. VWThickness of brake pads/linings and condition of brake discs; front and rear: Check

elsawin online

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru

Attention! Please use superetka.com/elsa

Touareg

Please use
superetka.com/elsa

PLEASE USE https://SUPERETKA.COM/elsa
elsa on kolhosniki not support now!

Thickness of brake pads/linings and condition of brake discs, front and rear: Check
Front disc brake pads: Check thickness → Chapter
Rear disc brake pads: Check thickness → Chapter
Condition of brake discs: Check → Chapter
Special tools and workshop equipment required
    
t  Torque wrench -V.A.G 1332-
t  Electric hand torch and mirror
  Note
The adapter to loosen and tighten the anti-theft wheel bolts can be found in the vehicle tool kit.
Front disc brake pads: Checking thickness
–  For better evaluation of remaining pad thickness, use a test mirror and, if necessary, remove the wheel on the side where the brake pad wear indicator is installed.
   W00-11165
–  Mark position of wheel relative to brake disc.
–  Unbolt wheel bolts and remove wheel.
–  Measure thickness of inner and outer pads.
a -  Pad thickness without backplate
Wear limit: 2 mm
The brake pads have reached their wear limit at a pad thickness of 2 mm (without backplate) and must be renewed (repair measure). Inform customer!
  Note
t  When replacing brake pads, always check brake discs as well for wear!
t  Checking and, if necessary, replacing the brake discs is a repair measure.
–  Check brake disc for wear. → Brake system → Rep. gr.46 → Repairing front brakes
–  Install wheel in marked position.
–  Tighten wheel bolts diagonally to following torque setting: → Chapter
–  Place adapter in vehicle tool kit after completing work.
–  Fit wheel bolt covers if necessary .
Rear disc brake pads: Checking thickness
–  Illuminate area behind hole in wheel using an electric hand torch.
   N01-10673
–  Determine thickness of outer pad by checking visually.
–  Illuminate inner pad with an electric hand torch and mirror.
–  Determine thickness of inner pad by checking visually.
a -  Inner and outer pad thickness without backplate
Wear limit: 2 mm
The brake pads have reached their wear limit at a pad thickness of 2 mm (without backplate) and must be renewed (repair measure). Inform customer!
  Note
t  When replacing brake pads, always check brake discs as well for wear!
t  Checking and, if necessary, replacing the brake discs is a repair measure.
–  Check brake disc for wear. → Brake system → Rep. gr.46 → Repairing rear brakes
Condition of brake discs: Check
Check all brake discs for the following damage pattern:
t  Cracks
t  Scoring
t  Rust (no surface rust)
t  Degree of wear at the ridge along the circumference
  Note
Inform customer if brake disc damage is similar to these damage patterns. Renewing the brake discs is a repair measure.
   N01-10674

Didn't find what you were looking for? Try to find in:
- Mitchell onDemand online


- ETKA ONLINE - login-pass from kolhosniki.ru

- NEW ELSA ONLINE - login-pass from kolhosniki.ru

This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20