Yandex MC
Elsa online. ElsaWin. ElsaWeb. VWWiper blade protection: Remove

elsawin online

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru

Attention! Please use superetka.com/elsa

Touareg

Please use
superetka.com/elsa

PLEASE USE https://SUPERETKA.COM/elsa
elsa on kolhosniki not support now!

Wiper blade protection: Remove
  Note
There are 3 different versions of wiper blade protection:
   
1. Version of wiper blade with protective strip and 2 securing clips
t  Identification: protective strip with 2 securing clips -arrows 1 + 2-
Remove wiper blade protection, version 1. → Chapter
  N01-10614
2. Version of wiper blade with slide-on protective strip
t  Identification, blade protector -arrow- is slid on wiper blade
Remove wiper blade protection, version 2. → Chapter
  N01-10618
3. Transport wiper blade
t  Identification: the transport wiper blade is fitted without wind deflector and must be replaced by the standard wiper blade.
Renewing wiper blade protection, version 3 “transport wiper blade” → Chapter
Removing wiper blade protection, version 1
  N01-10617
–  Switch ignition on and off briefly with bonnet closed.
–  After switching ignition off, move wiper lever down to touch-wipe position within 10 seconds.
The wipers move in service position.
–  Lift the wiper arm away from windscreen.
  Caution
When doing this, do not touch the wiper blade to prevent damage.
  N01-10732
–  Remove upper securing clip upwards and lower securing clip downwards -arrows-.
  N01-10615
–  Pull protective strip off wiper blade from bottom to top, as shown in illustration.
–  Carefully place wiper arm back onto windscreen.
–  Switch ignition on and briefly operate the wiper lever to move the wipers back to park position. Switch ignition off again.
Removing wiper blade protection, version 2
  N01-10616
–  Switch ignition on and off briefly with bonnet closed.
–  After switching ignition off, move wiper lever down to touch-wipe position within 10 seconds.
The wipers move in service position.
–  Lift the wiper arm away from windscreen.
  Caution
When doing this, do not touch the wiper blade to prevent damage.
  N01-10732
–  Pull protective strip off wiper blade upwards, as shown in illustration.
–  Carefully place wiper arm back onto windscreen.
–  Switch ignition on and briefly operate the wiper lever to move the wipers back to park position. Switch ignition off again.
Renewing wiper blade protection, version 3 “transport wiper blade”
  N01-10619
–  Switch ignition on and off briefly with bonnet closed.
–  After switching ignition off, move wiper lever down to touch-wipe position within 10 seconds.
The wipers move in service position.
–  Lift the wiper arm away from windscreen.
  N01-10732
–  Depending on version, turn wiper blade with lip upwards and pull off, or release wiper blade at joint -3- by pushing locking device -1- into mounting -2- and pull wiper blade out.
–  Push the standard wiper blade into mounting. Ensure that it audibly engages into locking device or turn wiper blade with lip down onto stop.
  Caution
When doing this, do not touch the wiper blade to prevent damage.
–  Carefully place wiper arm back onto windscreen.
–  Switch ignition on and briefly operate the wiper lever to move the wipers back to park position. Switch ignition off again.
  N01-10733

Didn't find what you were looking for? Try to find in:
- Mitchell onDemand online


- ETKA ONLINE - login-pass from kolhosniki.ru

- NEW ELSA ONLINE - login-pass from kolhosniki.ru
Loading...

This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20