Yandex MC
Elsa online. ElsaWin. ElsaWeb. VWWheel securing bolts: Tighten to specified torque

elsawin online

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru

Attention! Please use superetka.com/elsa

Touareg

Please use
superetka.com/elsa

PLEASE USE https://SUPERETKA.COM/elsa
elsa on kolhosniki not support now!

Wheel securing bolts: Tighten to specified torque
t  Pulling off wheel hub trim: → Anchor
t  Pulling off wheel trim → Anchor
t  Pulling off wheel bolt caps: → Anchor
t  Loosening/tightening anti-theft wheel bolts → Anchor
t  Tightening wheel bolts → Anchor
t  Installing wheel centre cover, wheel bolt cover caps and wheel cover → Anchor
Pulling off wheel hub trim
  Caution
On vehicles with light alloy wheels do not lever wheel hub trim off with screwdriver, only use the special tool for this purpose (puller hook in vehicle tool kit).
   
The puller hook -1- to remove the cover caps is located with the vehicle tool kit.
–  Hook puller hook into one drilling of wheel hub trim and pull off in -direction of arrow-.
  N01-10637
Pulling off wheel trim
–  On vehicles with wheel trim, loosen wheel trim all around as shown, e.g. using puller hook and wheel brace from vehicle tool kit -A- and pull off -arrow B-.
Pulling cover caps off wheel bolts
  Caution
On vehicles with light alloy wheels do not lever wheel bolt caps off with screwdriver, only use the special tool for this purpose (puller hook in vehicle tool kit).
  Note
Before loosening or tightening the wheel bolts, remove the cover caps.
  N01-10640
The puller hook to remove the cover caps is located with the vehicle tool kit.
–  Place the puller hook through opening in cover cap.
–  Pull off cap using the puller hook.
  N01-10642
Loosening/tightening anti-theft wheel bolts
  Note
t  To loosen/tighten the anti-theft wheel bolts a special adapter, located in vehicle tool kit, is required.
t  To loosen the anti-theft wheel bolts (lockable wheel bolts) do not use an impact screwdriver.
t  If the adapter to loosen or tighten the anti-theft wheel bolts is not available in the vehicle, use the corresponding adapter set for tamper-proof wheel bolts.
Special tools and workshop equipment required
  N01-10639
t  Adapter set for tamper-proof wheel bolts -T10101-
  W00-10188
t  Adapter set for tamper-proof wheel bolts -T10313-
  W00-10341
t  Torque wrench -V.A.G 1332-
  W00-11165
–  Slide adapter -2- into anti-theft wheel bolt -1- onto stop.
–  Slide the wheel bolt wrench onto adapter -2- onto stop.
Tightening wheel bolts
–  Tighten the wheel bolts diagonally and alternately to the following torque setting:
t  180 Nm
  WARNING
Never use an impact screwdriver to tighten the wheel bolts!
Installing wheel centre cover, wheel bolt cover caps and wheel cover
  N01-10639
–  Push wheel hub trim into opening of wheel hub. Ensure that -A and B- are accurately fitted on rim.
  N01-10641
Fit cover caps on wheel bolts.
  N01-10643
Install wheel trim by inserting trim evenly into steel wheel. Ensure that valve -B- seats in cut-out -A- of wheel trim.
  Note
Place adapter and puller hooks properly in vehicle tool kit after completing work.
  N01-10638

Didn't find what you were looking for? Try to find in:
- Mitchell onDemand online


- ETKA ONLINE - login-pass from kolhosniki.ru

- NEW ELSA ONLINE - login-pass from kolhosniki.ru
Loading...

This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20