Mitchell onDemand(proDemand) web-online. Is free
DATACENTER ERROR!!! Внимание! Авария в датацентре!!
Subscribe to the telegram channel https://t.me/kolhosniki_en
BODY INTERIOR
- HEADINGS
- 68 - Interior equipment
- Storage compartments and covers
- Glove compartment, removing and installing
- Removing right instrument panel cover
- Glove compartment lock, removing and installing
- Glove compartment cover, removing and installing
- Brake for glove compartment cover, removing and installing
- Version 1
- Version 2
- Glove compartment, removing and installing (vehicles with knee bolster)
- Removing right instrument panel cover
- Handle for glove compartment lock, removing and installing (vehicles with knee bolster)
- Drivers side storage compartment (with and without knee bolster), removing and installing
- Removing right instrument panel cover
- Auxiliary speaker, removing
- Instrument panel cover, removing and installing
- Center armrest, removing and installing
- Support bracket for center armrest, removing and installing
- Create cutout for armrest
- Center console, removing and installing (vehicles up to 10.04)
- Center console, removing and installing (vehicles from 11.04)
- Center console storage compartment, removing and installing (vehicles up to 10.04)
- Shift cover and shifter boot, removing and installing
- Navigation control head in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles up to 10.04)
- Cigarette lighter in center console, removing and installing (vehicles from 11.04)
- Footwell trim, removing and installing
- Parking brake lever handle, removing and installing
- Trim of parking brake lever, removing and installing
- Cellular phone holder in center console, removing and installing
- Holes for cellular phone holder on center console, drilling
- Telephone receiver cradle on center console, removing and installing
- Holes for telephone handset holder on center console, drilling
- Instrument panel center section, removing and installing
- Cupholder and storage compartment, removing and installing
- Front ashtray, removing and installing
- Rear ashtray, removing and installing
- Switch mount, removing and installing
- Glove compartment, removing and installing
- Rearview mirror
- Rearview mirror with fixed base, removing and installing
- Rearview mirror, removing (Automatic-dimming mirror, rearview mirror with compass)
- Automatic day/night rearview mirror function, testing
- Test requirements
- Test sequence
- Rearview mirror with compass, calibrating
- New compass, calibrating
- Calibration of an already existing compass
- Zone adjustment
- Rearview mirror retaining plate, bonding
- Repair method with glass-metal adhesive
- Work procedure
- Storage compartments and covers
- 69 - Passenger protection - Airbags, Seat belts
- Seat belts
- Pyrotechnic belt tensioners, safety and handling instructions
- Caring for pyrotechnic belt tensioners
- Disposing of pyrotechnic belt tensioners
- Seat belts - anchorage points (overview)
- Three-point seat belt with belt height adjuster, removing and installing
- Belt buckle anchorage point
- Version 1
- Version 2
- Passive Occupant Detection System (PODS) passenger airbag deactivation belt latch (USA only), replacing
- Seat belt anchor, removing and installing
- Rear three-point seat belt, removing and installing
- Right and left rear belt guide piece, removing and installing
- Third rear three-point seat belt (fixed rear seat backrest), removing and installing
- Third rear three-point seat belt (folding rear seat backrest), removing and installing
- Center floor assembly anchorage points
- Rear seat child seat anchorage (Sedan)
- Child seat anchorage bracket (Avant), removing and installing
- LATCH Lower Anchor and Tethers for Children bracket, removing and installing
- Front LATCH "Lower Anchor and Tethers for Children" bracket, removing and installing
- Rear LATCH "Lower Anchor and Tethers for Children" bracket, removing and installing
- Seat belts, inspecting
- Seat belts, inspecting
- Seat belts
- Check belt webbing
- Check retractor (locking function)
- Visually check belt latch
- Check belt latch function
- Check belt guides and locking tongue
- Check securing components and anchorage points
- Checking child seat anchorage function for supplemental child seats (not for drivers seat belt)
- Checking belt holding sensor for rear three-point seatbelt with belt tensioner
- Airbag safety precautions
- Airbag system, general safety precautions
- Side airbag, additional safety precautions
- Side curtain airbag, additional safety precautions
- Additional safety precautions for working on Passive Occupant Detection System (PODS) (USA only)
- Passive Occupant Detection System (PODS), passenger airbag deactivation procedure after a crash (USA only)
- Airbag units, replacing after an accident
- Testing of anchoring components after an accident
- Accident where airbag did not deploy
- Caring for pyrotechnic airbag units
- Disposing of airbag units
- Servicing airbag
- Location overview
- Airbag control module -J234-, removing and installing
- Battery Interrupt Igniter N253 , removing and installing (depending on vehicle equipment)
- Driver airbag, servicing
- Airbag unit, removing and installing (standard steering wheel)
- Steering wheel, removing and installing (standard steering wheel)
- Airbag unit, removing and installing (sport steering wheel)
- Steering wheel, removing and installing (sport steering wheel)
- Airbag unit, removing and installing (multi-function steering wheel)
- Steering wheel, removing and installing (multi-function steering wheel)
- Return spring with slip ring, removing and installing
- Passenger airbag, servicing
- Passenger airbag, removing and installing
- Disconnect airbag connector
- Front Passenger s Airbag Disabled Indicator Lamp K145 , removing and installing (vehicles up to 10.2003)
- Front Passenger s Airbag Disabled Indicator Lamp K145 , removing and installing (vehicles from 11.2003)
- Passenger airbag, removing and installing
- Side airbags, servicing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (top-mounted airbag), removing and installing
- Driver Side Airbag Igniter N199 and Front Passenger Side Airbag Igniter N200 (normal seat, power seat, interior-mounted airbag), removing and installing
- Rear side airbag (non-foldable backrest), removing and installing
- Rear side airbag (foldable backrest), removing and installing
- Side curtain airbag, servicing
- Side curtain airbag (Sedan), removing and installing
- Version 1
- Side curtain airbag fastener to B-pillar
- Disconnect side curtain airbag connector
- Version 2
- Side curtain airbag connector, disconnecting
- Side curtain airbag (Avant), removing and installing
- Version 1
- Version 2
- Side curtain airbag connector, disconnecting
- Side curtain airbag (Sedan), removing and installing
- Airbag crash sensors, servicing
- Front airbag crash sensor, removing and installing
- Crash sensor for front side airbag, removing and installing (vehicles up to 10.2004)
- Precautionary measures for handling crash sensors (pressure sensors) for front side airbag (vehicles from 11.2004)
- Crash sensor for front side airbag (pressure sensors), removing and installing (vehicles from 11.2004)
- Crash sensor for rear side airbag (side curtain airbag), removing and installing
- Seat belt latch detection
- Seat belt latch detection
- Passive Occupant Detection System (PODS) (USA), servicing
- Passive Occupant Detection System (PODS), removing and installing
- Seat belts
- 70 - Interior trim
- Front door trim
- Component locations, overview
- Front door trim, removing and installing
- Disengage release
- Connector on window regulator control module
- Door trim securing clip
- Armrest, removing and installing
- Disengage release
- Connector on window regulator control module
- Manual window crank, removing and installing
- Power window switch, removing and installing
- Door trim wiring harness overview
- Door warning lights and footwell lighting, removing and installing
- Treble speaker, removing and installing
- Bass speaker, removing and installing
- Interior door mechanism, removing and installing
- Rear door trim
- Component locations, overview
- Rear door trim, removing and installing
- Disengage release
- Connector on window regulator control module
- Door trim securing clip
- Power window switch, removing and installing
- Manual window crank, removing and installing
- Armrest, removing and installing
- Door trim wiring harness overview
- Door warning light, removing and installing
- Bass speaker, removing and installing
- Treble speaker, removing and installing
- Interior door mechanism, removing and installing
- Sun shade for door window, removing and installing
- Retaining clips for sun shade, removing and installing
- Instrument panel
- Component locations, overview
- Instrument panel, removing and installing
- Removing light switch and headlight beam adjuster
- Removing upper trim for steering column switch
- Removing photo sensor
- Removing center defroster vent
- Removing instrument panel speaker
- Disconnecting harness connectors for vent temperature sensor
- Removing left instrument panel cover
- Removing mount for left exterior instrument panel
- Removing right instrument panel cover
- Removing mount for right exterior instrument panel
- Removing driver-side instrument panel mount
- Removing center instrument panel mount
- Installing
- Left instrument panel trim, removing and installing
- Right instrument panel trim, removing and installing
- Left and right instrument panel vents, removing and installing
- Left and right instrument panel vents, removing and installing
- Center instrument panel vent, removing and installing
- Central tube, removing and installing
- Component locations, overview
- Instrument panel central tube, removing and installing
- Roof trim (Sedan)
- Sun visor, removing and installing
- Center sun visor, removing and installing
- Headliner, removing and installing
- Disconnect electrical connectors
- Wiring harness routing on rear side or molded headliner
- Roof grab handle, removing and installing
- Roof trim (Avant)
- Sun visor, removing and installing
- Center sun visor, removing and installing
- Headliner, removing and installing
- Disconnect electrical connectors
- Wiring harness routing on rear side or molded headliner
- Roof grab handle, removing and installing
- Trim (Sedan)
- Upper A-pillar trim, removing and installing
- Lower A-pillar trim, removing and installing
- Foot rest and foot rest bracket, removing and installing
- Foot rest, removing and installing
- Foot rest bracket, removing and installing
- Upper B-pillar trim, removing and installing
- Installing upper B pillar trim in belt height adjuster
- Lower B-pillar trim, removing and installing
- C-pillar trim, removing and installing
- D-pillar trim, removing and installing
- Roof end trim, removing and installing
- Wheelhousing trim, removing and installing
- Rear shelf, removing and installing
- Electrical sun shade threaded connection in luggage compartment
- Electrical sun shade on rear window, removing and installing
- Rear lid trim, removing and installing
- Emergency release handle, removing
- Rear cross panel trim, removing and installing
- Luggage compartment side trim, removing and installing
- Base bracket, removing and installing
- Rear panel trim, removing and installing
- Rear panel sill, removing and installing
- Dirt tray, removing and installing
- Luggage compartment floor mat, removing and installing
- Floor covering, removing and installing
- Trim, Avant
- C-pillar trim, removing and installing
- Trim above rear door, removing and installing
- Partition grille lifting eyes, loosening
- D-pillar trim, removing and installing
- Partition grille lifting eyes, loosening
- Roof panel trim, removing and installing
- Rear lid trim, removing and installing
- Lower lid trim, removing and installing
- Lower trim, disengaging from retainer
- Upper lid trim, removing and installing
- Lower lid trim, removing and installing
- Side luggage compartment trim
- Base bracket, removing and installing
- Rear power outlet, removing
- Partition grille, removing and installing
- Rear cross panel trim, removing and installing
- Storage area floor, removing and installing
- Cargo tray, removing and installing
- Tie-down console
- Front door trim
- 72 - Seat - Frames
- Front seats (standard seat) - vehicles up to 10.04
- Front seats (standard seat), removing and installing
- Front seat rail covers, removing and installing
- Rear front seat rail cover, removing and installing
- Seat belt anchor, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036 , connecting
- Side airbag connector, disconnecting
- Front backrest (standard seat), removing and installing
- Tunnel-side backrest trim, removing and installing
- Removing and installing backrest panel on door sill side
- Backrest adjustment wheel, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Headrest with insertion lock, removing and installing
- Front seats (standard seat), removing and installing
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat) - vehicles from 11.04
- Front seats (standard seat), removing and installing
- Disconnecting harness connectors
- Airbag Adapter VAS 6036 , connecting
- Side airbag connector, disconnecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest (standard seat), removing and installing
- Side airbag connector, vehicles without modular wiring routing through 08.05, disconnecting
- Backrest adjustment wheel, removing and installing
- Seat height adjustment handle, removing and installing
- Preparing assist tool to remove seat height adjusting handle
- Retaining clamp installation position
- Side trim (sill side), removing and installing
- Footwell cover retaining strip, loosening
- Tunnel-side side trim, removing and installing
- Footwell cover retaining strip, loosening
- Seat height adjustment unit, removing and installing
- Four-way lumbar support switch, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Storage compartment, disassembling
- Remove trim
- Handle with locking mechanism, removing
- Insert, removing
- Inner part, removing from outer part
- Storage compartment, assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest, replacing
- Seat pan, replacing
- Backrest cover, removing and installing
- Footwell cover retaining strip, loosening
- Four-way lumber support, removing and installing - up to 06.06
- Secure four-way lumbar support with assembly aid and secure plastic film to four-way lumbar support
- Four-way lumbar support with backrest frame, riveting
- Four-way lumbar support positioning motors, removing and installing
- Disconnecting electrical harness connector and disengaging retaining bracket at actuator
- Headrest with insertion lock, removing and installing
- Footwell light, removing and installing
- Front seat (standard seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front seats (power seat with memory) - vehicles up to 10.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning motor for seat fore-aft adjustment or malfunctioning control module, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036 , connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Backrest, replacing
- Seat pan, replacing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Electrical height adjuster on seats with bolted upper part of seat (older version), replacing
- Electrical height adjuster on seats with upper part of seat laser-welded to seat rail (new version), replacing
- Motor for seat tilt adjustment, removing and installing
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Removing mount for motor for backrest adjustment
- Preparing backrest adjustment motor
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seats (power seat with memory) - vehicles from 11.04
- Front seats (power seat with memory) - vehicles from 11.04
- Front power seats with memory, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Disconnecting connections
- Airbag Adapter VAS 6036 , connecting
- Side airbag connector, disconnecting
- Connector assignment for coupling station
- Modular wiring routing, vehicles from 08.05, assembly overview
- Modular wiring routing with corrugated tubing on front seat
- Seat rail covers, removing and installing
- Front backrest, removing and installing
- Side airbag connector, vehicles without modular wiring routing through 08.05, disconnecting
- Side panels on door sill side, removing and installing
- Footwell cover retaining strip, loosening
- Tunnel-side side trim, removing and installing
- Footwell cover retaining strip, loosening
- Backrest, replacing
- Seat pan, replacing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control Module for memory seat, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Drawer, removing and installing - vehicles through 06.06
- Passenger side storage compartment, assembly overview - vehicles from 06.06
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Seat cushion extension, removing and installing (sports seat)
- Backrest adjustment motor, removing and installing
- Removing mount for motor for backrest adjustment
- Preparing backrest adjustment motor
- Backrest cover, removing and installing
- Footwell cover retaining strip, loosening
- Four-way lumber support, vehicles up to 06.06 or from 11.06, removing and installing
- Secure four-way lumbar support with assembly aid and secure plastic film to four-way lumbar support
- Four-way lumbar support with backrest frame, riveting
- Four-way lumbar support positioning motors, removing and installing
- Disconnecting electrical harness connector and disengaging retaining bracket at actuator
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front seat (electric memory seat) without active head restraint system, vehicles from 06.06 or from 11.06, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front Recaro seats, vehicles through 10.04
- Seat, removing and installing
- Seat with faulty control module or seat fore-aft adjustment motor, removing
- Front seat rail covers, removing and installing
- Rear seat rail covers, removing and installing
- Disconnecting connections
- Airbag Adapter VAS 6036 , connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Side panels on door sill side, removing and installing
- Tunnel-side side trim, removing and installing
- Drawer, removing and installing
- Guide for side airbag, removing and installing
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat height adjustment motor, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Seat surface extension, removing and installing
- Backrest adjustment motor, removing and installing
- Removing mount for motor for backrest adjustment
- Preparing backrest adjustment motor
- Backrest cover, removing and installing
- Backrest frame, removing and installing
- Four-way lumbar support, removing and installing
- Four-way lumbar support motors, removing and installing
- Headrest with slide in locking mechanism, removing and installing
- Rear footwell lighting, removing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat wiring harness location
- Backrest wiring assignment
- Wiring harness for backrest, removing and installing
- Front Recaro seats, vehicles from 11.04
- Front Recaro seats, vehicles from 11.04
- Seat, removing and installing
- Front seat with malfunctioning control module or malfunctioning motor for seat fore-aft adjustment, removing
- Seat rail covers, removing and installing
- Disconnecting harness connectors
- Airbag adapter VAS 6036 , connecting
- Side airbag connector, disconnecting
- Front backrest, removing and installing
- Sill and tunnel side trim panels, assembly overview
- Sill side trim and assembly cover, removing and installing
- Assembly cover, removing and installing
- Front and rear sill side trim, removing and installing
- Tunnel side trim panel, removing and installing
- Sill side trim retaining bracket, assembly overview
- Front retaining bracket, removing and installing
- Rear retaining bracket, removing and installing
- Upper retaining bracket, removing and installing
- Drawer, vehicles through 06.06, removing and installing
- Passenger side storage compartment, vehicles from 06.06, assembly overview
- Storage compartment, removing and installing
- Storage compartment individual parts, assembly overview
- Storage compartment, disassembling and assembling
- Remove trim
- Handle with locking mechanism, removing
- Insert, removing
- Inner part, removing from outer part
- Seat adjustment switch, removing and installing
- Four-way lumbar support switch, removing and installing
- Control module, removing and installing
- Longitudinal seat adjustment motor, removing and installing
- Seat Height Adjustment Motor V245 or V246 , assembly overview
- Drivers Seat Height Adjustment Motor V245 or V246 , removing and installing
- Seat height adjustment toothed segment, removing and installing
- Motor for seat tilt adjustment, removing and installing
- Backrest adjustment motor, removing and installing
- Seat surface extension, removing and installing
- Backrest cover, removing and installing
- Footwell cover retaining strip, loosening
- Four-way lumbar support, removing and installing
- Secure four-way lumbar support with assembly aid and secure plastic film to four-way lumbar support
- Four-way lumbar support with backrest frame, riveting
- Four-way lumbar support positioning motors, removing and installing
- Disconnecting electrical harness connector and disengaging retaining bracket at actuator
- Headrest with slide in locking mechanism, removing and installing
- Footwell light, removing and installing
- Spring mat with wiring harness in seat pan, removing and installing
- Seat pan, assembly overview
- Seat pan, disassembling and assembling
- Recaro front seats without active head restraint system, assembly overview
- Backrest without active head restraint system, removing and installing headrests
- Backrest without active head restraint system, removing and installing backrest cover
- Backrest without active head restraint system, removing and installing four-way lumbar support
- Backrest without active head restraint system, removing and installing four-way lumbar support adjusting motors
- Backrest without active head restraint system, removing and installing headrest guides
- Backrest without active head restraint system, removing and installing cover with upholstery
- Backrest without active head restraint system, separating cover from upholstery
- Front RS sport seat
- Seat, removing and installing
- Seat rail cover, removing and installing
- Electrical harness connectors, disconnecting
- Connector housing with terminal resistance for side airbag
- Side panels, removing and installing
- Hand wheel for backrest adjustment, removing and installing
- Seat height adjustment handle, removing and installing
- Preparing assist tool to remove seat height adjusting handle
- Retaining clamp installation position
- Lumbar support adjustment switch, removing and installing
- Backrest bolster inflation adjustment button and bolster inflation adjustment button, removing and installing
- Control module, removing and installing
- Front seat backrest and seat pan, removing and installing
- Disconnect relay socket, disconnect harness connectors and pneumatic hose
- Disengaging actuating link for seat fore/aft adjustment
- Seat height adjustment unit, removing and installing
- Backrest covers, removing and installing
- Backrest cover, removing and installing
- Outer part of belt guide, removing and installing
- Pneumatic block - component assignment
- Rear seats
- Seatbench, removing and installing - vehicles up to 10.04
- Side airbag cable connector
- Replacing mountings
- Seatbench, removing and installing - vehicles from 11.04
- Side airbag cable connector
- Replacing mountings
- 1/3 backrest, removing and installing
- 2/3 right backrest, removing and installing
- Center armrest, removing and installing
- Rear seat side padding, removing and installing
- Side airbag connector, disconnecting
- Center bracket, removing and installing
- Outer backrest fitting, removing and installing
- Headrests - component overview
- Headrest with insertion lock, removing and installing
- Headrests without insertion lock, removing and installing
- Fixed backrest, removing and installing
- Side airbag wiring connector, disconnecting
- Replacing mountings
- Seatbench, removing and installing - vehicles up to 10.04
- Rear Recaro seats
- Rear seat bench, removing and installing
- Front seats (standard seat) - vehicles up to 10.04
- 74 - Seats - Upholstery, Covers
- Front seat covers and upholstery
- Seating area cover and upholstery, removing and installing (standard seat)
- Cover for LATCH "Lower Anchor and Tethers for Children" bracket, cutting
- Cover and cushion for seat pan, removing and installing (sport seat)
- Separating seat cushion extension from cover and cushion
- Separating cover from upholstery
- Backrest cover and padding, removing and installing
- Grip channels and plastic clips, removing and installing
- Footwell light, removing and installing
- Seat heating element, removing and installing
- Seat heating element (glued in), removing and installing
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Backrest heating element (glued in), removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Seating area cover and upholstery, removing and installing (standard seat)
- Front seat covers and upholstery (seat memory, electrical seat adjustment)
- Cover and upholstery for seat pan, removing and installing (standard seat)
- Separating cover and upholstery from seat pan
- Separating cover from upholstery
- Cover and cushion for seat pan, removing and installing (sport seat)
- Separating cover and upholstery from seat pan
- Separating seat cushion extension from cover and cushion
- Separating cover from upholstery
- Cover and cushion for backrest, removing and installing (sport seat, standard seat)
- Separating cover and upholstery from backrest frame
- Separating cover from upholstery
- Headrest guides, vehicles through 10.04, removing and installing
- Headrest guides, removing and installing - vehicles from 11.04
- Seat heating element, removing and installing (standard seat)
- Seat heating element, removing and installing (sports seat)
- Backrest heating element, removing and installing
- Backrest heating element (glued in), removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Cover and upholstery for seat pan, removing and installing (standard seat)
- Front Recaro seat covers and upholstery
- Seat pan cover and padding, removing and installing
- Separating cover and upholstery from seat pan
- Separating seat cushion extension from cover and cushion
- Separating cover from upholstery
- Backrest cover and padding, removing and installing
- Separating cover and upholstery from backrest frame
- Separating cover from upholstery
- Headrest guides, removing and installing
- Seat heating element, removing and installing
- Backrest heating element, removing and installing
- Backrest heating element (glued in), removing and installing
- Cover and upholstery for headrests with slide in locking mechanism, removing and installing
- Seat pan cover and padding, removing and installing
- Seat cushion and cover of front RS sport seat
- Seat pan cover and padding, removing and installing
- Disengaging flap with air cushion for seat bolster inflation adjustment
- Backrest cover and padding, removing and installing
- Pry grip channel for backrest cover out of guide
- Disengaging flap for backrest bolster inflation adjustment
- Seat heating element, removing and installing
- Backrest heating element, removing and installing
- Seat pan cover and padding, removing and installing
- Rear seat covers and upholstery
- Seat bench cover and upholstery, removing and installing
- Cover and cushion for solid rear backrest, removing and installing
- Separating cover and upholstery from backrest frame
- Separating cover from upholstery
- Divided backrest cover and upholstery, removing and installing
- 1/3 backrest cover and upholstery, removing and installing
- 2/3 backrest cover and upholstery, removing and installing
- Check points after complete backrest installation
- Lock cylinder, removing and installing
- Headrest guides with insertion lock, removing and installing
- Outer headrest guides without insertion lock, removing and installing
- Inner headrest guides without insertion lock, removing and installing
- Frame for ski sack, removing and installing (foldable rear seat)
- Ski sack, removing and installing (folding rear seat backrest)
- Ski sack cover, cutting out (non-folding seat)
- Rear Recaro seats
- Seat bench cover and upholstery, removing and installing
- Front seat covers and upholstery
- Fig. 1: Identifying Special Hook 3370
- Fig. 2: Torque Wrench V.A.G 1410
- Fig. 3: Glove Compartment Remove/Install Components
- Fig. 4: Removing Right Instrument Panel Cover
- Fig. 5: Glove Compartment Lock, Removing/Installing
- Fig. 6: Pressing Pin Out In At Connection Between Brake For Glove Compartment Cover And Glove Compartment Cover
- Fig. 7: Knocking Pins On Left/Right Out Of Glove Compartment Using A Drift
- Fig. 8: Identifying Special Hook 3370
- Fig. 9: Pressing Pin Out In At Connection Between Brake For Glove Compartment Cover And Glove Compartment Cover
- Fig. 10: Rotating Brake For Glove Compartment Cover In Opening And Removing Brake For Glove Compartment Cover
- Fig. 11: Removing Right Instrument Panel Cover
- Fig. 12: Disconnecting Electrical Connector, Removing Joint Pin 1 & Disengaging Brake For Glove Compartment Cover In A Clockwise
- Fig. 13: Identifying Special Hook 3370
- Fig. 14: Torque Wrench V.A.G 1410
- Fig. 15: Glove Compartment (Vehicles With Knee Bolster) Remove/Install Components
- Fig. 16: Removing Right Instrument Panel Cover
- Fig. 17: Handle For Glove Compartment Lock (Vehicles With Knee Bolster) Remove/Install Components
- Fig. 18: Identifying Special Hook 3370
- Fig. 19: Identifying Torque Wrench V.A.G. 1331
- Fig. 20: Drivers Side Storage Compartment (With And Without Knee Bolster) Remove/Install Components
- Fig. 21: Removing Right Instrument Panel Cover
- Fig. 22: Auxiliary Speaker, Removing
- Fig. 23: Instrument Panel Cover Remove/Install Components
- Fig. 24: Identifying Torque Wrench V.A.G. 1331
- Fig. 25: Center Armrest Remove/Install Components
- Fig. 26: Identifying Torque Wrench V.A.G. 1331
- Fig. 27: Removing Nut & Support Foot
- Fig. 28: Creating Cutout For Armrest
- Fig. 29: Identifying Torque Wrench V.A.G. 1331
- Fig. 30: Torque Wrench V.A.G 1410
- Fig. 31: Center Console (Vehicles Up To 10.04) Remove/Install Components
- Fig. 32: Identifying Torque Wrench V.A.G. 1331
- Fig. 33: Torque Wrench V.A.G 1410
- Fig. 34: Center Console (Vehicles From 11.04) Remove/Install Components
- Fig. 35: Center Console Storage Compartment (Vehicles Up To 10.04) Remove/Install Components
- Fig. 36: Shift Cover And Shifter Boot Remove/Install Components
- Fig. 37: Identifying Torque Wrench V.A.G 1783
- Fig. 38: Navigation Control Head In Center Console (Vehicles Up To 10.04) Remove/Install Components
- Fig. 39: Identifying Torque Wrench V.A.G 1783
- Fig. 40: Cigarette Lighter In Center Console (Vehicles Up To 10.04) Remove/Install Components
- Fig. 41: Cigarette Lighter In Center Console (Vehicles From 11.04) Remove/Install Components
- Fig. 42: Footwell Trim, Removing/Installing
- Fig. 43: Parking Brake Lever Handle, Removing/Installing
- Fig. 44: Identifying Torque Wrench V.A.G 1783
- Fig. 45: Trim Of Parking Brake Lever, Removing/Installing
- Fig. 46: Cellular Phone Holder In Center Console, Removing/Installing
- Fig. 47: Holes For Cellular Phone Holder On Center Console, Drilling
- Fig. 48: Telephone Receiver Cradle On Center Console Remove/Install Components
- Fig. 49: Holes For Telephone Handset Holder On Center Console, Drilling
- Fig. 50: Torque Wrench V.A.G 1410
- Fig. 51: Instrument Panel Center Section Remove/Install Components
- Fig. 52: Identifying Special Hook 3370
- Fig. 53: Identifying Special Tools - Radio Removal Tool T10057
- Fig. 54: Removing Trim Using Hook For Front End 3370
- Fig. 55: Inserting Radio Release Tool T10057 At Catches (2X) And Removing Cup Holder Or Storage Compartment
- Fig. 56: Torque Wrench V.A.G 1410
- Fig. 57: Front Ashtray Remove/Install Components
- Fig. 58: Rear Ashtray Remove/Install Components
- Fig. 59: Switch Mount Remove/Install Components
- Fig. 60: Rotating Mirror Until Retaining Spring Releases And Removing Mirror
- Fig. 61: Fitting Mirror To Final Position And Then Turning Mirror Until Locking Spring Clicks Into Place
- Fig. 62: Removing Rearview Mirror (Automatic Day/Night Mirror, Rearview Mirror With Compass)
- Fig. 63: Installing Rearview Mirror (Automatic Day/Night Mirror, Rearview Mirror With Compass)
- Fig. 64: North American Magnetic Field Graph
- Fig. 65: Glass/Metal Adhesive Set D 000 703 A1
- Fig. 66: Rearview Mirror Dimension
- Fig. 67: Seat Belts - Anchorage Points (Overview)
- Fig. 68: Identifying Torque Wrench V.A.G. 1331
- Fig. 69: Identifying Torque Wrench V.A.G. 1332
- Fig. 70: Three-Point Seat Belt With Belt Height Adjuster Remove/Install Components
- Fig. 71: Identifying Torque Wrench V.A.G. 1331
- Fig. 72: Removing Bolt For Belt Latch
- Fig. 73: Using Screwdriver To Pry Out Retaining Hooks On Red Connector Housing, Pressing Red Connector Housing Back & Cable Pin (2X) For Belt Fasten Sensor
- Fig. 74: Identifying Red Connector Housing, Cable Retainer, Cut-Out & Cable
- Fig. 75: Identifying Connector, Clip, Bolt & Belt Latch
- Fig. 76: Identifying Torque Wrench V.A.G. 1331
- Fig. 77: Identifying Connector, Clip, Bolt & Belt Latch
- Fig. 78: Seat Belt Anchor Remove/Install Components
- Fig. 79: Identifying Torque Wrench V.A.G. 1332
- Fig. 80: Rear Three-Point Seat Belt Remove/Install Components
- Fig. 81: Right And Left Rear Belt Guide Piece Remove/Install Components
- Fig. 82: Identifying Torque Wrench V.A.G. 1332
- Fig. 83: Third Rear Three-Point Seat Belt (Fixed Rear Seat Backrest) Remove/Install Components
- Fig. 84: Identifying Torque Wrench V.A.G. 1332
- Fig. 85: Third Rear Three-Point Seat Belt (Folding Rear Seat Backrest) Remove/Install Components
- Fig. 86: Identifying Torque Wrench V.A.G. 1332
- Fig. 87: Center Floor Assembly Anchorage Points
- Fig. 88: Identifying Torque Wrench V.A.G. 1331
- Fig. 89: Rear Seat Child Seat Anchorage (Sedan) Remove/Install Components
- Fig. 90: Identifying Torque Wrench V.A.G. 1331
- Fig. 91: Child Seat Anchorage Bracket (Avant) Remove/Install Components
- Fig. 92: Torque Wrench V.A.G 1410
- Fig. 93: Front Latch "Lower Anchor And Tethers For Children" Bracket Remove/Install Components
- Fig. 94: Identifying Torque Wrench V.A.G. 1331
- Fig. 95: Rear Latch "Lower Anchor And Tethers For Children" Bracket Remove/Install Components
- Fig. 96: Checking Belt Webbing - Belt Webbing Cut, Torn Or Chafed
- Fig. 97: Checking Belt Webbing - Webbing Loops On Belt Edge Torn
- Fig. 98: Checking Belt Webbing - Burned Spots From Cigarettes Or Something Else
- Fig. 99: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 100: Diagnostic System VAS 5051: Display - Display Fields
- Fig. 101: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 102: Diagnostic System VAS 5051: Display
- Fig. 103: Identifying Content Of DTC Memory & Identification Of Fault On Diagnostic System VAS 5051 Display
- Fig. 104: Servicing Airbag Location Overview
- Fig. 105: Torque Wrench V.A.G 1410
- Fig. 106: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 107: Airbag Control Module -J234- Remove/Install Components
- Fig. 108: Identifying Torque Wrench V.A.G. 1331
- Fig. 109: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 110: Battery Interrupt Igniter N253 (Depending On Vehicle Equipment) Remove/Install Components
- Fig. 111: Removing Nuts From B+ Wires, Battery Interrupt Igniter N253 From Retainer
- Fig. 112: Releasing Connector Lock Using A Screwdriver Until It Stops To Disengages Electrical Harness Connector
- Fig. 113: Identifying Torque Wrench V.A.G. 1331
- Fig. 114: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 115: Airbag Unit (Standard Steering Wheel) Remove/Install Components
- Fig. 116: Identifying Torque Wrench V.A.G. 1331
- Fig. 117: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 118: Steering Wheel (Standard Steering Wheel) Remove/Install Components
- Fig. 119: Identifying Torque Wrench V.A.G. 1331
- Fig. 120: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 121: Airbag Unit (Sport Steering Wheel) Remove/Install Components
- Fig. 122: Identifying Torque Wrench V.A.G. 1331
- Fig. 123: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 124: Steering Wheel (Sport Steering Wheel) Remove/Install Components
- Fig. 125: Identifying Torque Wrench V.A.G. 1331
- Fig. 126: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 127: Airbag Unit (Multi-Function Steering Wheel) Remove/Install Components
- Fig. 128: Identifying Torque Wrench V.A.G. 1331
- Fig. 129: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 130: Steering Wheel (Multi-Function Steering Wheel) Remove/Install Components
- Fig. 131: Torx Screwdriver T8 T 40056
- Fig. 132: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 133: Removing Torx Bolts With Torx Screwdriver T 40056 As Well As Hex Socket Head Bolt
- Fig. 134: Disconnecting Connector, Release Catch And Pulling Return Spring With Slip Ring From Steering Column Switches
- Fig. 135: Torque Wrench V.A.G 1410
- Fig. 136: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 137: Passenger Airbag Remove/Install Components
- Fig. 138: Disconnect Airbag Connector
- Fig. 139: Identifying Special Hook 3370
- Fig. 140: Removing Trim Using Hook For Front End 3370
- Fig. 141: Pulling Out Front Passenger S Airbag Disabled Indicator Lamp K145 Of Switch Mount Using Flat Screwdriver
- Fig. 142: Torque Wrench V.A.G 1410
- Fig. 143: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 144: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 145: Fixture For Seat Repair VAS 6136
- Fig. 146: Driver Side Airbag Igniter N199 And Front Passenger Side Airbag Igniter N200 (Top-Mounted Airbag) Remove/Install Components
- Fig. 147: Torque Wrench V.A.G 1410
- Fig. 148: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 149: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 150: Fixture For Seat Repair VAS 6136
- Fig. 151: Upholstery Clip Pliers V.A.G 1634
- Fig. 152: Driver Side Airbag Igniter N199 And Front Passenger Side Airbag Igniter N200 (Normal Seat, Power Seat, Interior-Mounted Airbag) Remove/Install Components
- Fig. 153: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 154: Rear Side Airbag (Non-Foldable Backrest) Remove/Install Components
- Fig. 155: Torque Wrench V.A.G 1410
- Fig. 156: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 157: Rear Side Airbag (Foldable Backrest) Remove/Install Components
- Fig. 158: Identifying Torque Wrench V.A.G 1783
- Fig. 159: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 160: Side Curtain Airbag (Sedan) Remove/Install Components (Version 1)
- Fig. 161: Side Curtain Airbag Fastener To B-Pillar
- Fig. 162: Disconnect Side Curtain Airbag Connector
- Fig. 163: Side Curtain Airbag (Sedan) Remove/Install Components (Version 2)
- Fig. 164: Unlocking Connector Lock With Small Screwdriver & Disconnecting Connector From Ignition Pill
- Fig. 165: Side Curtain Airbag (Sedan) Remove/Install Components (Version 2)
- Fig. 166: Identifying Torque Wrench V.A.G 1783
- Fig. 167: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 168: Side Curtain Airbag (Avant) Remove/Install Components (Version 1)
- Fig. 169: Side Curtain Airbag (Avant) Remove/Install Components (Version 2)
- Fig. 170: Unlocking Connector Lock With Small Screwdriver & Disconnecting Connector From Ignition Pill
- Fig. 171: Side Curtain Airbag (Avant) Remove/Install Components (Version 2)
- Fig. 172: Torque Wrench V.A.G 1410
- Fig. 173: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 174: Front Airbag Crash Sensor Remove/Install Components
- Fig. 175: Torque Wrench V.A.G 1410
- Fig. 176: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 177: Crash Sensor For Front Side Airbag (Vehicles Up To 10.2004) Remove/Install Components
- Fig. 178: Torque Wrench V.A.G 1410
- Fig. 179: Crash Sensor For Front Side Airbag (Pressure Sensors) (Vehicles From 11.2004) Remove/Install Components
- Fig. 180: Torque Wrench V.A.G 1410
- Fig. 181: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 182: Crash Sensor For Rear Side Airbag (Side Curtain Airbag) Remove/Install Components
- Fig. 183: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 184: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 185: Fixture For Seat Repair VAS 6136
- Fig. 186: Removing/Installing Front Passengers Seat Occupied Sensor G128 Connector & Front Passengers Seat Occupied Sensor G128
- Fig. 187: Removing/Installing Front Passengers Seat Occupied Sensor G128 Connector & Front Passengers Seat Occupied Sensor G128
- Fig. 188: Passive Occupant Detection System (PODS) Remove/Install Components
- Fig. 189: Service Kit, Removing/Installing
- Fig. 190: Service Kit, Removing/Installing
- Fig. 191: Passive Occupant Detection System (PODS) Remove/Install Components
- Fig. 192: Front Door Trim Component Locations, Overview
- Fig. 193: Front Door Trim Remove/Install Components
- Fig. 194: Identifying Circlip, Release & Guide
- Fig. 195: Connector On Window Regulator Control Module
- Fig. 196: Pressing Catch And Removing Clip
- Fig. 197: Armrest Remove/Install Components
- Fig. 198: Identifying Circlip, Release & Guide
- Fig. 199: Connector On Window Regulator Control Module
- Fig. 200: Manual Window Crank Remove/Install Components
- Fig. 201: Identifying Installation Position With Window Closed
- Fig. 202: Power Window Switch Remove/Install Components
- Fig. 203: Door Trim Wiring Harness Overview
- Fig. 204: Door Warning Lights And Footwell Lighting Remove/Install Components
- Fig. 205: Treble Speaker Remove/Install Components
- Fig. 206: Bass Speaker Remove/Install Components
- Fig. 207: Interior Door Mechanism Remove/Install Components
- Fig. 208: Rear Door Trim Component Locations, Overview
- Fig. 209: Rear Door Trim Remove/Install Components
- Fig. 210: Identifying Circlip, Release & Guide
- Fig. 211: Connector On Window Regulator Control Module
- Fig. 212: Pressing Catch And Removing Clip
- Fig. 213: Connector On Window Regulator Control Module
- Fig. 214: Manual Window Crank Remove/Install Components
- Fig. 215: Identifying Installation Position With Window Closed
- Fig. 216: Armrest Remove/Install Components
- Fig. 217: Door Trim Wiring Harness Overview
- Fig. 218: Door Warning Light Remove/Install Components
- Fig. 219: Bass Speaker Remove/Install Components
- Fig. 220: Treble Speaker Remove/Install Components
- Fig. 221: Interior Door Mechanism Remove/Install Components
- Fig. 222: Removing Guiding Strips From Holding Clips, Covers & Disengaging Gripping Part Of Sun Shade
- Fig. 223: Removing Screws & Sun Shade
- Fig. 224: Retaining Clips For Sun Shade
- Fig. 225: Instrument Panel Component Locations, Overview
- Fig. 226: Torx Screwdriver T8 T 40056
- Fig. 227: Identifying Special Hook 3370
- Fig. 228: Identifying Torque Wrench V.A.G 1783
- Fig. 229: Pressing Light Switch And Turning Toward Right Simultaneously
- Fig. 230: Holding Switch In This Position And Removing Light Switch From Switch Housing
- Fig. 231: Pressing Headlamp Range Control Adjuster Out Of Switch Housing
- Fig. 232: Removing Upper Trim For Steering Column Switch
- Fig. 233: Removing Photo Sensor
- Fig. 234: Removing Center Defroster Vent
- Fig. 235: Removing Instrument Panel Speaker
- Fig. 236: Disconnecting Harness Connectors For Vent Temperature Sensor
- Fig. 237: Pulling Off Left Instrument Panel Cover Using Special Hook 3370
- Fig. 238: Removing Mount For Left Exterior Instrument Panel
- Fig. 239: Removing Right Instrument Panel Cover
- Fig. 240: Removing Mount For Right Exterior Instrument Panel
- Fig. 241: Removing Driver-Side Instrument Panel Mount
- Fig. 242: Removing Center Instrument Panel Mount
- Fig. 243: Checking Whether Felt Is Installed On Clip On Left/Right
- Fig. 244: Identifying Special Hook 3370
- Fig. 245: Identifying Torque Wrench V.A.G 1783
- Fig. 246: Pulling Off Left Instrument Panel Cover Using Special Hook 3370
- Fig. 247: Pressing Light Switch And Turning Toward Right Simultaneously
- Fig. 248: Holding Switch In This Position And Removing Light Switch From Switch Housing
- Fig. 249: Pressing Headlamp Range Control Adjuster Out Of Switch Housing
- Fig. 250: Removing Bolts
- Fig. 251: Identifying Special Hook 3370
- Fig. 252: Identifying Torque Wrench V.A.G 1783
- Fig. 253: Removing Trim Using Hook For Front End 3370
- Fig. 254: Removing Right Instrument Panel Cover
- Fig. 255: Removing Bolts
- Fig. 256: Removing Bolts
- Fig. 257: Identifying Special Hook 3370
- Fig. 258: Removing Instrument Panel Vent Rearward Using Special Hook 3370
- Fig. 259: Pop Rivet Pliers VAS 5072
- Fig. 260: Identifying Weld Points
- Fig. 261: Removing Damaged Air Vent
- Fig. 262: Identifying Special Hook 3370
- Fig. 263: Removing Instrument Panel Vent Alternately On Left And Right Toward Rear Using Special Hook 3370
- Fig. 264: Central Tube, Component Locations, Overview
- Fig. 265: Identifying Pry Lever 80-200
- Fig. 266: Identifying Torque Wrench V.A.G. 1331
- Fig. 267: Identifying Torque Wrench V.A.G 1783
- Fig. 268: Removing Bolts Of Fuse Carrier
- Fig. 269: Identifying Bolts, 3-Socket Relay Carrier & 6-Socket Relay Carrier
- Fig. 270: Removing Bolt Of Pedal Bracket
- Fig. 271: Identifying Left Brace Bolts & Screw
- Fig. 272: Disengaging Air Guide At Air Conditioner And Removing It Upward
- Fig. 273: Removing Screws & Expose Cable
- Fig. 274: Removing Bolts Of Bracket For Air Conditioner
- Fig. 275: Removing Securing Clips And Cowl
- Fig. 276: Removing Screws And Cover From E-Box In Plenum Chamber
- Fig. 277: Using Screwdriver To Remove Retainer Bar And Engine Control Module (ECM) J623
- Fig. 278: Removing Bolts Of Connector Station
- Fig. 279: Removing Left Bolts, Upper Bolt & Ground (GND) Wires
- Fig. 280: Removing Right Bolt & Unscrewing Ground (GND) Wires
- Fig. 281: Pulling Out Pins Upward, Removing Air Guide Upward & Unscrewing Ground (GND) Wires
- Fig. 282: Pressing Off Wiring Harness Behind Central Tube For Instrument Panel From Central Tube For Instrument Panel
- Fig. 283: Using Pry Lever 80 - 200 To Remove Instrument Panel Central Tube
- Fig. 284: Identifying Torque Wrench V.A.G 1783
- Fig. 285: Sun Visor Remove/Install Components
- Fig. 286: Identifying Torque Wrench V.A.G 1783
- Fig. 287: Identifying Bolt & Center Sun Visor
- Fig. 288: Headliner Remove/Install Components
- Fig. 289: Unclipping Trim On Mirror Boot And Disconnecting Electrical Harness Connector
- Fig. 290: Wiring Harness Routing On Rear Side Or Molded Headliner
- Fig. 291: Identifying Torque Wrench V.A.G 1783
- Fig. 292: Identifying Covers, Bolts & Roof Grab Handle
- Fig. 293: Identifying Torque Wrench V.A.G 1783
- Fig. 294: Sun Visor Remove/Install Components
- Fig. 295: Identifying Torque Wrench V.A.G 1783
- Fig. 296: Identifying Bolt & Center Sun Visor
- Fig. 297: Headliner Remove/Install Components
- Fig. 298: Uncliping Trim On Mirror Boot And Disconnecting Electrical Harness Connector
- Fig. 299: Wiring Harness Routing On Rear Side Or Molded Headliner
- Fig. 300: Identifying Torque Wrench V.A.G 1783
- Fig. 301: Identifying Covers, Bolts & Roof Grab Handle
- Fig. 302: Torque Wrench V.A.G 1410
- Fig. 303: Upper A-Pillar Trim Remove/Install Components
- Fig. 304: Lower A-Pillar Trim Remove/Install Components
- Fig. 305: Torque Wrench V.A.G 1410
- Fig. 306: Removing Nut & Pressing Foot Rest Upward To Remove
- Fig. 307: Torque Wrench V.A.G 1410
- Fig. 308: Upper B-Pillar Trim Remove/Install Components
- Fig. 309: Installing Upper B Pillar Trim In Belt Height Adjuster
- Fig. 310: Lower B-Pillar Trim Remove/Install Components
- Fig. 311: Torque Wrench V.A.G 1410
- Fig. 312: C-Pillar Trim Remove/Install Components
- Fig. 313: Torque Wrench V.A.G 1410
- Fig. 314: D-Pillar Trim Remove/Install Components
- Fig. 315: Roof End Trim Remove/Install Components
- Fig. 316: Wheelhousing Trim Remove/Install Components
- Fig. 317: Torque Wrench V.A.G 1410
- Fig. 318: Rear Shelf Remove/Install Components
- Fig. 319: Electrical Sun Shade Threaded Connection In Luggage Compartment
- Fig. 320: Electrical Sun Shade On Rear Window Remove/Install Components
- Fig. 321: Identifying Torque Wrench V.A.G 1783
- Fig. 322: Rear Lid Trim Remove/Install Components
- Fig. 323: Emergency Release Handle, Removing
- Fig. 324: Torque Wrench V.A.G 1410
- Fig. 325: Rear Cross Panel Trim Remove/Install Components
- Fig. 326: Torque Wrench V.A.G 1410
- Fig. 327: Luggage Compartment Side Trim Remove/Install Components
- Fig. 328: Torque Wrench V.A.G 1410
- Fig. 329: Base Bracket Remove/Install Components
- Fig. 330: Rear Panel Trim Remove/Install Components
- Fig. 331: Identifying Torque Wrench V.A.G 1783
- Fig. 332: Rear Panel Sill Remove/Install Components
- Fig. 333: Dirt Tray Remove/Install Components
- Fig. 334: Luggage Compartment Floor Mat Remove/Install Components
- Fig. 335: Floor Covering Remove/Install Components
- Fig. 336: Identifying Torque Wrench V.A.G 1783
- Fig. 337: C-Pillar Trim Remove/Install Components
- Fig. 338: Identifying Torque Wrench V.A.G 1783
- Fig. 339: Torque Wrench V.A.G 1410
- Fig. 340: Trim Above Rear Door Remove/Install Components
- Fig. 341: Pressing Covering Plate In Partition Grill Eyelet
- Fig. 342: Identifying Torque Wrench V.A.G 1783
- Fig. 343: Torque Wrench V.A.G 1410
- Fig. 344: D-Pillar Trim Remove/Install Components
- Fig. 345: Pressing Covering Plate In Partition Grill Eyelet
- Fig. 346: Roof Panel Trim Remove/Install Components
- Fig. 347: Identifying Special Hook 3370
- Fig. 348: Lower Lid Trim Remove/Install Components
- Fig. 349: Lower Trim, Disengaging From Retainer
- Fig. 350: Upper Lid Trim Remove/Install Components
- Fig. 351: Identifying Torque Wrench V.A.G 1783
- Fig. 352: Side Luggage Compartment Trim Remove/Install Components
- Fig. 353: Identifying Torque Wrench V.A.G 1783
- Fig. 354: Base Bracket Remove/Install Components
- Fig. 355: Identifying Special Hook 3370
- Fig. 356: Rear Power Outlet Remove/Install Components
- Fig. 357: Partition Grille Remove/Install Components
- Fig. 358: Torque Wrench V.A.G 1410
- Fig. 359: Rear Cross Panel Trim Remove/Install Components
- Fig. 360: Storage Area Floor Remove/Install Components
- Fig. 361: Cargo Tray Remove/Install Components
- Fig. 362: Torque Wrench V.A.G 1410
- Fig. 363: Tie-Down Console Remove/Install Components
- Fig. 364: Identifying Torque Wrench V.A.G. 1332
- Fig. 365: Front Seat Rail Covers Remove/Install Components
- Fig. 366: Rear Front Seat Rail Cover Remove/Install Components
- Fig. 367: Seat Belt Anchor Remove/Install Components
- Fig. 368: Disconnecting Connections
- Fig. 369: Airbag Adapter VAS 6036
- Fig. 370: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 371: Airbag Adapter VAS 6036 , Connecting
- Fig. 372: Side Airbag Connector, Disconnecting
- Fig. 373: Identifying Torque Wrench V.A.G. 1331
- Fig. 374: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 375: Fixture For Seat Repair VAS 6136
- Fig. 376: Front Backrest (Standard Seat) Remove/Install Components
- Fig. 377: Tunnel-Side Backrest Trim Remove/Install Components
- Fig. 378: Assembly Tool 3399
- Fig. 379: Removing Backrest Adjustment Wheel
- Fig. 380: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 381: Fixture For Seat Repair VAS 6136
- Fig. 382: Seat Cushion Extension (Sports Seat) Remove/Install Components
- Fig. 383: Pushing Release Button In And Pulling Headrest Upward As Far As Possible
- Fig. 384: Pressing Release Button On Headrest Until Stop
- Fig. 385: Front Seats (Standard Seat) Remove/Install Components
- Fig. 386: Disconnecting Harness Connectors
- Fig. 387: Airbag Adapter VAS 6036
- Fig. 388: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 389: Airbag Adapter VAS 6036, Connecting
- Fig. 390: Side Airbag Connector, Disconnecting
- Fig. 391: Connector Assignment For Coupling Station
- Fig. 392: Modular Wiring Routing, Vehicles From 08.05, Assembly Overview
- Fig. 393: Identifying Trim Removal Wedge 3409
- Fig. 394: Uncliping Connector Station Cover Under Front Seat
- Fig. 395: Releasing Cable Bracket On Connector Station By Pressing Retaining Tabs On Both Sides
- Fig. 396: Using Trim Removal Wedge 3409 To Open Cable Bracket
- Fig. 397: Removing Bolt & Cable Clip From Corrugated Tubing
- Fig. 398: Opening Fabric Band & Corrugated Tubing
- Fig. 399: Ensuring Side Of Cable Bracket Connects To Last Rib On Corrugated Tubing
- Fig. 400: Binding Transition Of Seat Side Of Corrugated Tubing And Wiring Harness With Self-Adhesive Fabric Tape
- Fig. 401: Ensuring First Pins On Cover Engage Correctly In Mounts On Connector Station
- Fig. 402: Seat Rail Covers Remove/Install Components
- Fig. 403: Identifying Torque Wrench V.A.G. 1331
- Fig. 404: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 405: Fixture For Seat Repair VAS 6136
- Fig. 406: Front Backrest (Standard Seat) Remove/Install Components
- Fig. 407: Identifying Connectors, Clip, Cable Tie Clips, Harness Connector Of Side Airbag Ground (Gnd), Backrest Heater Connector & Four-Way Lumbar Support Connector
- Fig. 408: Pressing Catch And Disconnecting Connector For Side Airbag
- Fig. 409: Assembly Tool 3399
- Fig. 410: Removing Backrest Adjustment Wheel
- Fig. 411: Seat Height Adjustment Handle Remove/Install Components
- Fig. 412: Preparing Assist Tool To Remove Seat Height Adjusting Handle
- Fig. 413: Retaining Clamp Installation Position
- Fig. 414: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 415: Fixture For Seat Repair VAS 6136
- Fig. 416: Side Trim (Sill Side) Remove/Install Components
- Fig. 417: Disengaging Retaining Strip On Footwell Cover From Brackets Rear Sill Side Trim
- Fig. 418: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 419: Fixture For Seat Repair VAS 6136
- Fig. 420: Tunnel-Side Side Trim Remove/Install Components
- Fig. 421: Disengaging Retaining Strip On Footwell Cover From Brackets Rear Sill Side Trim
- Fig. 422: Torque Wrench V.A.G 1410
- Fig. 423: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 424: Fixture For Seat Repair VAS 6136
- Fig. 425: Seat Height Adjustment Unit Remove/Install Components
- Fig. 426: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 427: Fixture For Seat Repair VAS 6136
- Fig. 428: Removing Bolts & Four-Way Lumbar Support Switch
- Fig. 429: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 430: Fixture For Seat Repair VAS 6136
- Fig. 431: Drawer, Vehicles Through 06.06 Remove/Install Components
- Fig. 432: Passenger Side Storage Compartment, From 06.06, Assembly Overview
- Fig. 433: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 434: Fixture For Seat Repair VAS 6136
- Fig. 435: Storage Compartment Remove/Install Components
- Fig. 436: Storage Compartment Individual Parts, Assembly Overview
- Fig. 437: Using Trim Removal Wedge 3409 To Unclip Trim From Retaining Tabs On Inner Part
- Fig. 438: Handle With Locking Mechanism, Removing
- Fig. 439: Removing Insert From Inner Part
- Fig. 440: Inner Part, Removing From Outer Part
- Fig. 441: Removing Outer Part From Guide On Inner Part
- Fig. 442: Storage Compartment, Assembling
- Fig. 443: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 444: Fixture For Seat Repair VAS 6136
- Fig. 445: Seat Cushion Extension (Sports Seat) Remove/Install Components
- Fig. 446: Backrest, Replacing
- Fig. 447: Seat Pan, Replacing
- Fig. 448: Backrest Cover Remove/Install Components
- Fig. 449: Disengaging Retaining Strip On Footwell Cover From Brackets Rear Sill Side Trim
- Fig. 450: Four-Way Lumber Support - Up To 06.06 Remove/Install Components
- Fig. 451: Securing Four-Way Lumbar Support With Assembly Aid And Plastic Film To Four-Way Lumbar Support
- Fig. 452: Four-Way Lumbar Support With Backrest Frame, Riveting
- Fig. 453: Four-Way Lumbar Support Positioning Motors Remove/Install Components
- Fig. 454: Disconnecting Electrical Harness Connector And Disengaging Retaining Bracket At Actuator
- Fig. 455: Pushing Release Button In And Pulling Headrest Upward As Far As Possible
- Fig. 456: Pressing Release Button On Headrest Until Stop
- Fig. 457: Identifying Rear Footwell Light & Connector
- Fig. 458: Front Seat (Standard Seat) Without Active Head Restraint System, Vehicles From 06.06 Or From 11.06, Assembly Overview
- Fig. 459: Special Pop Rivet Pliers V.A.G 1753A
- Fig. 460: Backrest Without Active Head Restraint System - Four-Way Lumbar Support Remove/Install Components
- Fig. 461: Disengaging Four-Way Lumbar Support With Springs At Backrest Frame
- Fig. 462: Backrest Without Active Head Restraint System - Four-Way Lumbar Support Remove/Install Components
- Fig. 463: Laying Plastic Film Over Velcro Strips On Lumbar Support
- Fig. 464: Four-Way Lumbar Support With Backrest Frame, Riveting
- Fig. 465: Identifying Torque Wrench V.A.G. 1332
- Fig. 466: Front Power Seats With Memory Remove/Install Components
- Fig. 467: Identifying Torque Wrench V.A.G. 1331
- Fig. 468: Front Seat With Malfunctioning Motor For Seat Fore-Aft Adjustment Or Malfunctioning Control Module, Removing Overview
- Fig. 469: Front Seat With Malfunctioning Motor For Seat Fore-Aft Adjustment Or Malfunctioning Control Module, Installing Overview
- Fig. 470: Front Seat Rail Covers Remove/Install Components
- Fig. 471: Rear Seat Rail Covers Remove/Install Components
- Fig. 472: Disconnecting Connections
- Fig. 473: Airbag Adapter VAS 6036
- Fig. 474: Airbag Adapter VAS 6036 , Connecting
- Fig. 475: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 476: Side Airbag Connector, Disconnecting
- Fig. 477: Identifying Torque Wrench V.A.G. 1331
- Fig. 478: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 479: Fixture For Seat Repair VAS 6136
- Fig. 480: Removing Front Backrest
- Fig. 481: Installing Front Backrest
- Fig. 482: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 483: Fixture For Seat Repair VAS 6136
- Fig. 484: Side Panels On Door Sill Side Remove/Install Components
- Fig. 485: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 486: Fixture For Seat Repair VAS 6136
- Fig. 487: Tunnel-Side Side Trim Remove/Install Components
- Fig. 488: Backrest, Replacing
- Fig. 489: Seat Pan, Replacing
- Fig. 490: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 491: Fixture For Seat Repair VAS 6136
- Fig. 492: Guide For Side Airbag Remove/Install Components
- Fig. 493: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 494: Fixture For Seat Repair VAS 6136
- Fig. 495: Seat Adjustment Switch Remove/Install Components
- Fig. 496: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 497: Fixture For Seat Repair VAS 6136
- Fig. 498: Four-Way Lumbar Support Switch Remove/Install Components
- Fig. 499: Identifying Torque Wrench V.A.G 1783
- Fig. 500: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 501: Fixture For Seat Repair VAS 6136
- Fig. 502: Identifying Bolts & Control Module
- Fig. 503: Identifying Retaining Bracket, Connectors, Catches & Control Module
- Fig. 504: Longitudinal Seat Adjustment Motor Remove/Install Components
- Fig. 505: Electrical Height Adjuster On Seats With Bolted Upper Part Of Seat (Older Version), Replacing
- Fig. 506: Loosening Shoulder Pin, Nut And Lever On Height Adjuster Gearing And Removing Shoulder Pin
- Fig. 507: Removing Both Microencapsulated Bolts At Sail To Height Adjuster Gearing
- Fig. 508: Torque Wrench V.A.G 1410
- Fig. 509: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 510: Fixture For Seat Repair VAS 6136
- Fig. 511: Motor For Seat Tilt Adjustment Remove/Install Components
- Fig. 512: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 513: Fixture For Seat Repair VAS 6136
- Fig. 514: Seat Cushion Extension (Sports Seat) Remove/Install Components
- Fig. 515: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 516: Fixture For Seat Repair VAS 6136
- Fig. 517: Longitudinal Seat Adjustment Motor Remove/Install Components
- Fig. 518: Identifying Backrest Frame, Wood Block, Socket, Shaft & Spring Washer
- Fig. 519: Identifying Backrest Frame, Wood Block, Socket, Shaft & Spring Washer
- Fig. 520: Identifying Backrest Frame, Wood Block, Socket, Shaft & Spring Washer
- Fig. 521: Removing Mount For Motor For Backrest Adjustment
- Fig. 522: Preparing Backrest Adjustment Motor
- Fig. 523: Identifying Backrest Frame, Wire Clips, Backrest Cover & Clips
- Fig. 524: Identifying Backrest Frame, Wire Clips, Backrest Cover & Clips
- Fig. 525: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 526: Fixture For Seat Repair VAS 6136
- Fig. 527: Four-Way Lumbar Support Remove/Install Components
- Fig. 528: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 529: Fixture For Seat Repair VAS 6136
- Fig. 530: Longitudinal Seat Adjustment Motor Remove/Install Components
- Fig. 531: Pushing Release Button In And Pulling Headrest Upward As Far As Possible
- Fig. 532: Pressing Release Button On Headrest Until Stop
- Fig. 533: Identifying Rear Footwell Light & Connector
- Fig. 534: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 535: Fixture For Seat Repair VAS 6136
- Fig. 536: Spring Mat With Wiring Harness In Seat Pan Remove/Install Components
- Fig. 537: Seat Wiring Harness Location
- Fig. 538: Backrest Wiring Assignment
- Fig. 539: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 540: Fixture For Seat Repair VAS 6136
- Fig. 541: Wiring Harness For Backrest Remove/Install Components
- Fig. 542: Identifying Torque Wrench V.A.G. 1332
- Fig. 543: Front Power Seats With Memory Remove/Install Components
- Fig. 544: Front Seat With Malfunctioning Control Module Or Malfunctioning Motor For Seat Fore-Aft Adjustment, Removing Overview
- Fig. 545: Disconnecting Connections
- Fig. 546: Airbag Adapter VAS 6036
- Fig. 547: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 548: Airbag Adapter VAS 6036, Connecting
- Fig. 549: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 550: Side Airbag Connector, Disconnecting
- Fig. 551: Connector Assignment For Coupling Station
- Fig. 552: Seat Rail Covers Remove/Install Components
- Fig. 553: Identifying Torque Wrench V.A.G. 1331
- Fig. 554: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 555: Fixture For Seat Repair VAS 6136
- Fig. 556: Removing Front backrest
- Fig. 557: Installing Front backrest
- Fig. 558: Pressing Catch And Disconnecting Connector For Side Airbag
- Fig. 559: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 560: Fixture For Seat Repair VAS 6136
- Fig. 561: Side Panels On Door Sill Side Remove/Install Components
- Fig. 562: Disengaging Retaining Strip On Footwell Cover From Brackets Rear Sill Side Trim
- Fig. 563: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 564: Fixture For Seat Repair VAS 6136
- Fig. 565: Tunnel-Side Side Trim Remove/Install Components
- Fig. 566: Disengaging Retaining Strip On Footwell Cover From Brackets Rear Sill Side Trim
- Fig. 567: Backrest, Replacing
- Fig. 568: Seat Pan, Replacing
- Fig. 569: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 570: Fixture For Seat Repair VAS 6136
- Fig. 571: Seat Adjustment Switch Remove/Install Components
- Fig. 572: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 573: Fixture For Seat Repair VAS 6136
- Fig. 574: Four-Way Lumbar Support Switch Remove/Install Components
- Fig. 575: Identifying Torque Wrench V.A.G 1783
- Fig. 576: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 577: Fixture For Seat Repair VAS 6136
- Fig. 578: Identifying Bolts & Control Module
- Fig. 579: Identifying Retaining Bracket, Connectors, Catches & Control Module
- Fig. 580: Longitudinal Seat Adjustment Motor Remove/Install Components
- Fig. 581: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 582: Fixture For Seat Repair VAS 6136
- Fig. 583: Longitudinal Seat Adjustment Motor Remove/Install Components
- Fig. 584: Torque Wrench V.A.G 1410
- Fig. 585: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 586: Fixture For Seat Repair VAS 6136
- Fig. 587: Motor For Seat Tilt Adjustment Remove/Install Components
- Fig. 588: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 589: Fixture For Seat Repair VAS 6136
- Fig. 590: Drawer Remove/Install Components
- Fig. 591: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 592: Fixture For Seat Repair VAS 6136
- Fig. 593: Seat Cushion Extension (Sports Seat) Remove/Install Components
- Fig. 594: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 595: Fixture For Seat Repair VAS 6136
- Fig. 596: Backrest Adjustment Motor Remove/Install Components
- Fig. 597: Identifying Backrest Frame, Wood Block, Socket, Shaft & Spring Washer
- Fig. 598: Identifying Backrest Frame, Wood Block, Socket, Shaft & Spring Washer
- Fig. 599: Removing Mount For Motor For Backrest Adjustment
- Fig. 600: Preparing Backrest Adjustment Motor
- Fig. 601: Backrest Cover Remove/Install Components
- Fig. 602: Disengaging Retaining Strip On Footwell Cover From Brackets Rear Sill Side Trim
- Fig. 603: Four-Way Lumber Support, Vehicles Up To 06.06 Or From 11.06 Remove/Install Components
- Fig. 604: Securing Four-Way Lumbar Support With Assembly Aid And Plastic Film To Four-Way Lumbar Support
- Fig. 605: Four-Way Lumbar Support With Backrest Frame, Riveting
- Fig. 606: Four-Way Lumbar Support Positioning Motors Remove/Install Components
- Fig. 607: Disconnecting Electrical Harness Connector And Disengaging Retaining Bracket At Actuator
- Fig. 608: Pushing Release Button In And Pulling Headrest Upward As Far As Possible
- Fig. 609: Pressing Release Button On Headrest Until Stop
- Fig. 610: Identifying Rear Footwell Light & Connector
- Fig. 611: Seat Pan, Assembly Overview
- Fig. 612: Identifying Bolts & Seat Pan Upper Frame
- Fig. 613: Identifying Bushings & Lower Seat Pan Frame
- Fig. 614: Identifying Bushings & Lower Seat Pan Frame
- Fig. 615: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 616: Fixture For Seat Repair VAS 6136
- Fig. 617: Spring Mat With Wiring Harness In Seat Pan Remove/Install Components
- Fig. 618: Seat Wiring Harness Location
- Fig. 619: Backrest Wiring Assignment
- Fig. 620: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 621: Fixture For Seat Repair VAS 6136
- Fig. 622: Wiring Harness For Backrest Remove/Install Components
- Fig. 623: Front Seat (Electric Memory Seat) Without Active Head Restraint System, Vehicles From 06.06 Or From 11.06, Assembly Overview
- Fig. 624: Special Pop Rivet Pliers V.A.G 1753A
- Fig. 625: Backrest Without Active Head Restraint System - Four-Way Lumbar Support Remove/Install Components
- Fig. 626: Disengaging Four-Way Lumbar Support With Springs At Backrest Frame
- Fig. 627: Backrest Without Active Head Restraint System - Four-Way Lumbar Support Remove/Install Components
- Fig. 628: Securing Four-Way Lumbar Support With Assembly Aid And Plastic Film To Four-Way Lumbar Support
- Fig. 629: Four-Way Lumbar Support With Backrest Frame, Riveting
- Fig. 630: Identifying Torque Wrench V.A.G. 1332
- Fig. 631: Seat Remove/Install Components
- Fig. 632: Identifying Torque Wrench V.A.G. 1331
- Fig. 633: Seat With Faulty Control Module Or Seat Fore-Aft Adjustment Motor, Removing Overview
- Fig. 634: Seat With Faulty Control Module Or Seat Fore-Aft Adjustment Motor, Installing Overview
- Fig. 635: Front Seat Rail Covers Remove/Install Components
- Fig. 636: Rear Seat Rail Covers Remove/Install Components
- Fig. 637: Disconnecting Connections
- Fig. 638: Airbag Adapter VAS 6036
- Fig. 639: Airbag Adapter VAS 6036 , Connecting
- Fig. 640: Identifying Vehicle Diagnosis, Testing And Information System VAS 5051
- Fig. 641: Side Airbag Connector, Disconnecting
- Fig. 642: Identifying Torque Wrench V.A.G. 1331
- Fig. 643: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 644: Fixture For Seat Repair VAS 6136
- Fig. 645: Front Backrest Remove/Install Components
- Fig. 646: Front Backrest Remove/Install Components (Seats With Seat Memory)
- Fig. 647: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 648: Fixture For Seat Repair VAS 6136
- Fig. 649: Side Panels On Door Sill Side Remove/Install Components
- Fig. 650: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 651: Fixture For Seat Repair VAS 6136
- Fig. 652: Tunnel-Side Side Trim Remove/Install Components
- Fig. 653: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 654: Fixture For Seat Repair VAS 6136
- Fig. 655: Drawer Remove/Install Components
- Fig. 656: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 657: Fixture For Seat Repair VAS 6136
- Fig. 658: Guide For Side Airbag Remove/Install Components
- Fig. 659: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 660: Fixture For Seat Repair VAS 6136
- Fig. 661: Seat Adjustment Switch Remove/Install Components
- Fig. 662: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 663: Fixture For Seat Repair VAS 6136
- Fig. 664: Four-Way Lumbar Support Switch Remove/Install Components
- Fig. 665: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 666: Fixture For Seat Repair VAS 6136
- Fig. 667: Identifying Bolts & Control Module
- Fig. 668: Identifying Retaining Bracket, Connectors, Catches & Control Module
- Fig. 669: Longitudinal Seat Adjustment Motor Remove/Install Components
- Fig. 670: Torque Wrench V.A.G 1410
- Fig. 671: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 672: Fixture For Seat Repair VAS 6136
- Fig. 673: Seat Height Adjustment Motor Remove/Install Components
- Fig. 674: Torque Wrench V.A.G 1410
- Fig. 675: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 676: Fixture For Seat Repair VAS 6136
- Fig. 677: Motor For Seat Tilt Adjustment Remove/Install Components
- Fig. 678: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 679: Fixture For Seat Repair VAS 6136
- Fig. 680: Seat Surface Extension Remove/Install Components
- Fig. 681: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 682: Fixture For Seat Repair VAS 6136
- Fig. 683: Longitudinal Seat Adjustment Motor Remove/Install Components
- Fig. 684: Identifying Backrest Frame, Wood Block, Socket, Shaft & Spring Washer
- Fig. 685: Identifying Backrest Frame, Wood Block, Socket, Shaft & Spring Washer
- Fig. 686: Removing Mount For Motor For Backrest Adjustment
- Fig. 687: Preparing Backrest Adjustment Motor
- Fig. 688: Identifying Backrest Frame, Wire Clips, Backrest Cover & Clips
- Fig. 689: Identifying Backrest Frame, Wire Clips, Backrest Cover & Clips
- Fig. 690: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 691: Fixture For Seat Repair VAS 6136
- Fig. 692: Four-Way Lumbar Support Remove/Install Components
- Fig. 693: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 694: Fixture For Seat Repair VAS 6136
- Fig. 695: Four-Way Lumbar Support Motors Remove/Install Components
- Fig. 696: Pushing Release Button In And Pulling Headrest Upward As Far As Possible
- Fig. 697: Pressing Release Button On Headrest Until Stop
- Fig. 698: Identifying Rear Footwell Light & Connector
- Fig. 699: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 700: Fixture For Seat Repair VAS 6136
- Fig. 701: Spring Mat With Wiring Harness In Seat Pan Remove/Install Components
- Fig. 702: A
- Fig. 703: Backrest Wiring Assignment
- Fig. 704: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 705: Fixture For Seat Repair VAS 6136
- Fig. 706: Wiring Harness For Backrest Remove/Install Components
- Fig. 707: Front Power Seats With Memory Remove/Install Components
- Fig. 708: Front Seat With Malfunctioning Control Module Or Malfunctioning Motor For Seat Fore-Aft Adjustment, Removing
- Fig. 709: Seat Rail Covers Remove/Install Components
- Fig. 710: Sill And Tunnel Side Trim Panels, Assembly Overview
- Fig. 711: Identifying Trim Removal Wedge 3409
- Fig. 712: Assembly Cover, Removing/Installing
- Fig. 713: Disengaging Retaining Strip On Footwell Cover From Brackets Rear Sill Side Trim
- Fig. 714: Removing Expanding Rivets
- Fig. 715: Removing Bolts
- Fig. 716: Front/Rear Sill Side Trim Remove/Install Components
- Fig. 717: Disengaging Retaining Strip On Footwell Cover From Brackets Rear Sill Side Trim
- Fig. 718: Removing Expanding Rivets & Tunnel Side Trim Panel Upward
- Fig. 719: Sill Side Trim Retaining Bracket, Assembly Overview
- Fig. 720: Sill Side Trim Retaining Bracket, Assembly Overview
- Fig. 721: Front Retaining Bracket Remove/Install Components
- Fig. 722: Rear Retaining Bracket Remove/Install Components
- Fig. 723: Upper Retaining Bracket Remove/Install Components
- Fig. 724: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 725: Fixture For Seat Repair VAS 6136
- Fig. 726: Drawer, Vehicles Through 06.06 Remove/Install Components
- Fig. 727: Passenger Side Storage Compartment, Vehicles From 06.06, Assembly Overview
- Fig. 728: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 729: Fixture For Seat Repair VAS 6136
- Fig. 730: Storage Compartment Remove/Install Components
- Fig. 731: Storage Compartment Individual Parts, Assembly Overview
- Fig. 732: Using Trim Removal Wedge 3409 To Unclip Trim From Retaining Tabs On Inner Part
- Fig. 733: Handle With Locking Mechanism, Removing
- Fig. 734: Removing Insert From Inner Part
- Fig. 735: Inner Part, Removing From Outer Part
- Fig. 736: Removing Outer Part From Guide On Inner Part
- Fig. 737: Storage Compartment, Assembling
- Fig. 738: Seat Height Adjustment Motor V245 Or V246 , Assembly Overview
- Fig. 739: Disconnecting Electrical Connector On Drivers Seat Height Adjustment Motor V245 Or Front Passenger S Seat Height Adjustment Motor V246
- Fig. 740: Removing Drivers Seat Height Adjustment Motor V245 Or Front Passenger Seat Height Adjustment Motor V246 Toward Center Of Seat From Seat Pan Lower Frame
- Fig. 741: Ensuring Clip And Plastic Toothed Segment Collar As Well As Locking Pins Are Inserted Correctly In Holes On Fitting
- Fig. 742: Ensuring Locking Pins Are Inserted Correctly In Holes On Link Plate
- Fig. 743: Identifying Trim Removal Wedge 3409
- Fig. 744: Using Trim Removal Wedge 3409 To Unclip Plastic Toothed Segment From Fitting
- Fig. 745: Clipping Plastic Toothed Segment Into Fitting
- Fig. 746: Ensuring Locking Pins Are Inserted Correctly In Holes On Link Plate
- Fig. 747: Torque Wrench V.A.G 1410
- Fig. 748: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 749: Fixture For Seat Repair VAS 6136
- Fig. 750: Motor For Seat Tilt Adjustment Remove/Install Components
- Fig. 751: Backrest Cover Remove/Install Components
- Fig. 752: Disengaging Retaining Strip On Footwell Cover From Brackets Rear Sill Side Trim
- Fig. 753: Four-Way Lumbar Support Remove/Install Components
- Fig. 754: Securing Four-Way Lumbar Support With Assembly Aid And Plastic Film To Four-Way Lumbar Support
- Fig. 755: Four-Way Lumbar Support With Backrest Frame, Riveting
- Fig. 756: Four-Way Lumbar Support Positioning Motors Remove/Install Components
- Fig. 757: Disconnecting Electrical Harness Connector And Disengaging Retaining Bracket At Actuator
- Fig. 758: Seat Pan, Assembly Overview
- Fig. 759: Identifying Bolts & Seat Pan Upper Frame
- Fig. 760: Identifying Bushings & Lower Seat Pan Frame
- Fig. 761: Identifying Bushings & Lower Seat Pan Frame
- Fig. 762: Recaro Front Seats Without Active Head Restraint System, Assembly Overview
- Fig. 763: Special Pop Rivet Pliers V.A.G 1753A
- Fig. 764: Backrest Without Active Head Restraint System - Four-Way Lumbar Support Remove/Install Components
- Fig. 765: Disengaging Four-Way Lumbar Support With Springs At Backrest Frame
- Fig. 766: Backrest Without Active Head Restraint System - Four-Way Lumbar Support Remove/Install Components
- Fig. 767: Laying Plastic Film Over Velcro Strips On Lumbar Support
- Fig. 768: Four-Way Lumbar Support With Backrest Frame, Riveting
- Fig. 769: Identifying Torque Wrench V.A.G. 1332
- Fig. 770: Seat Remove/Install Components
- Fig. 771: Seat Rail Cover Remove/Install Components
- Fig. 772: Electrical Harness Connectors, Disconnecting
- Fig. 773: Connector Housing With Terminal Resistance For Side Airbag
- Fig. 774: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 775: Fixture For Seat Repair VAS 6136
- Fig. 776: Side Panels Remove/Install Components
- Fig. 777: Hand Wheel For Backrest Adjustment Remove/Install Components
- Fig. 778: Seat Height Adjustment Handle Remove/Install Components
- Fig. 779: Preparing Assist Tool To Remove Seat Height Adjusting Handle
- Fig. 780: Retaining Clamp Installation Position
- Fig. 781: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 782: Fixture For Seat Repair VAS 6136
- Fig. 783: Removing Lumbar Support Adjustment Switch Bolts
- Fig. 784: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 785: Fixture For Seat Repair VAS 6136
- Fig. 786: Backrest Bolster Inflation Adjustment Button And Bolster Inflation Adjustment Button Remove/Install Components
- Fig. 787: Control Module Remove/Install Components
- Fig. 788: Identifying Torque Wrench V.A.G. 1331
- Fig. 789: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 790: Fixture For Seat Repair VAS 6136
- Fig. 791: Front Seat Backrest And Seat Pan Remove/Install Components
- Fig. 792: Disconnecting Relay Socket, Harness Connectors And Pneumatic Hose
- Fig. 793: Disengaging Actuating Link For Seat Fore/Aft Adjustment
- Fig. 794: Torque Wrench V.A.G 1410
- Fig. 795: Special Tool - Engine And Transmission Holder VAS 6095
- Fig. 796: Fixture For Seat Repair VAS 6136
- Fig. 797: Seat Height Adjustment Unit Remove/Install Components
- Fig. 798: Identifying Pry Lever 80-200
- Fig. 799: Seat Height Adjustment Unit Remove/Install Components
- Fig. 800: Backrest Cover, Removing/Installing
- Fig. 801: Outer Part Of Belt Guide, Removing/Installing
- Fig. 802: Identifying Pry Lever 80-200
- Fig. 803: Pneumatic Block - Component Assignment
- Fig. 804: Seatbench - Vehicles Up To 10.04 Remove/Install Components
- Fig. 805: Side Airbag Cable Connector
- Fig. 806: Replacing Mountings
- Fig. 807: Seatbench - Vehicles From 11.04 Remove/Install Components
- Fig. 808: Side Airbag Cable Connector
- Fig. 809: Replacing Mountings
- Fig. 810: Identifying Screw, Clamp & Trim
- Fig. 811: Identifying Backrest, Center Bracket, Fitting & Grommet
- Fig. 812: Identifying Screw, Clamp & Trim
- Fig. 813: Identifying Backrest, Center Bracket, Fitting & Grommet
- Fig. 814: 2/3 Right Backrest Remove/Install Components
- Fig. 815: Identifying Backrest, Center Bracket, Fitting & Grommet
- Fig. 816: Identifying Backrest, Center Bracket, Fitting & Grommet
- Fig. 817: Identifying Backrest, Center Bracket, Fitting & Grommet
- Fig. 818: Center Armrest Remove/Install Components
- Fig. 819: Removing Bearing Bushing
- Fig. 820: Identifying Torque Wrench V.A.G. 1332
- Fig. 821: Torque Wrench V.A.G 1410
- Fig. 822: Rear Seat Side Padding Remove/Install Components
- Fig. 823: Side Airbag Connector, Disconnecting
- Fig. 824: Removing Bolts From Center Mounting Bracket
- Fig. 825: Removing Bolts From Outer Fitting
- Fig. 826: Headrests - Component Overview
- Fig. 827: Pushing Release Button And Pulling Headrest Upward As Far As Possible
- Fig. 828: Pressing Release Button On Headrest Until Stop
- Fig. 829: Pushing Release Button And Pulling Headrest Upward As Far As Possible
- Fig. 830: Fixed Backrest Remove/Install Components
- Fig. 831: Side Airbag Wiring Connector, Disconnecting
- Fig. 832: Replacing Mountings
- Fig. 833: Seating Area Cover And Upholstery (Standard Seat) Remove/Install Components
- Fig. 834: Cover For Latch "Lower Anchor And Tethers For Children" Bracket, Cutting
- Fig. 835: Cover And Cushion For Seat Pan (Sport Seat) Remove/Install Components
- Fig. 836: Identifying Seat Cushion Extension & Nuts
- Fig. 837: Separating Seat Cushion Extension From Cover And Cushion
- Fig. 838: Separating Cover From Upholstery
- Fig. 839: Identifying Cover, Plastic Clips & Fastening Strips
- Fig. 840: Backrest Cover And Padding Remove/Install Components
- Fig. 841: Grip Channels And Plastic Clips Remove/Install Components
- Fig. 842: Prying Out Rear Footwell Light Off On One Side From Backrest Panel Using Screwdriver
- Fig. 843: Seat Heating Element (Glued In) Remove/Install Components
- Fig. 844: Seat Heating Element (Sports Seat) Remove/Install Components
- Fig. 845: Seat Heating Element (Sports Seat) Remove/Install Components
- Fig. 846: Laying Right And Left Wire Connections Into Opening
- Fig. 847: Identifying Heating Element, Electrical Wire & Gap
- Fig. 848: Disengaging Grip Channel By Prying Out Of Guide Channel Using A Screwdriver
- Fig. 849: Removing First Headrest Support On Side Lying Opposite Of Button From Cushion With Cover
- Fig. 850: Removing/Installing Cushion Out Of Cover
- Fig. 851: Removing/Installing Cushion Out Of Cover
- Fig. 852: Removing First Headrest Support On Side Lying Opposite Of Button From Cushion With Cover
- Fig. 853: Separating Cover And Upholstery From Seat Pan
- Fig. 854: Identifying Cover, Plastic Clips & Fastening Strips
- Fig. 855: Separating Cover And Upholstery From Seat Pan
- Fig. 856: Identifying Seat Cushion Extension, Nuts, Peripheral Fastening Strips, Seat Heating Connector & Tab
- Fig. 857: Separating Seat Cushion Extension From Cover And Cushion
- Fig. 858: Separating Cover From Upholstery
- Fig. 859: Identifying Cover, Plastic Clips & Fastening Strips
- Fig. 860: Separating Cover And Upholstery From Backrest Frame
- Fig. 861: Separating Cover From Upholstery
- Fig. 862: Pushing Release Button In And Pulling Headrest Upward As Far As Possible
- Fig. 863: Pressing Release Button On Headrest Until Stop
- Fig. 864: Headrest Guides, Removing And Installing
- Fig. 865: Pushing Release Button In And Pulling Headrest Upward As Far As Possible
- Fig. 866: Pressing Release Button On Headrest Until Stop
- Fig. 867: Headrest Guide Without Release Button:
- Fig. 868: Headrest Guide With Release Button:
- Fig. 869: Seat Heating Element (Glued In) Remove/Install Components
- Fig. 870: Seat Heating Element (Sports Seat) Remove/Install Components
- Fig. 871: Identifying Heating Element, Electrical Wire & Gap
- Fig. 872: Cover And Upholstery For Headrests With Slide In Locking Mechanism Remove/Install Components
- Fig. 873: Removing/Installing Cushion Out Of Cover
- Fig. 874: Separating Cover And Upholstery From Seat Pan
- Fig. 875: Identifying Clips, Seat Cushion Extension, Grip Channels, Seat Heater, Seat Cushion Extension & Nuts
- Fig. 876: Separating Seat Cushion Extension From Cover And Cushion
- Fig. 877: Separating Cover From Upholstery
- Fig. 878: Identifying Cover, Plastic Clips & Fastening Strips
- Fig. 879: Separating Cover And Upholstery From Backrest Frame
- Fig. 880: Separating Cover From Upholstery
- Fig. 881: Headrest Guides, Removing And Installing
- Fig. 882: Seat Heating Element (Sports Seat) Remove/Install Components
- Fig. 883: Identifying Heating Element, Electrical Wire & Gap
- Fig. 884: Cover And Upholstery For Headrests With Slide In Locking Mechanism Remove/Install Components
- Fig. 885: Removing/Installing Cushion Out Of Cover
- Fig. 886: Seat Pan Cover And Padding Remove/Install Components
- Fig. 887: Disengaging Flap With Air Cushion For Seat Bolster Inflation Adjustment
- Fig. 888: Backrest Cover And Padding Remove/Install Components
- Fig. 889: Pry Grip Channel For Backrest Cover Out Of Guide
- Fig. 890: Disengaging Flap For Backrest Bolster Inflation Adjustment
- Fig. 891: Seat Heating Element Remove/Install Components
- Fig. 892: Backrest Heating Element Remove/Install Components
- Fig. 893: Seat Bench Cover And Upholstery Remove/Install Components
- Fig. 894: Closing Pliers VAS 6138
- Fig. 895: Cover And Cushion For Solid Rear Backrest Remove/Install Components (Separating Cover And Upholstery From Backrest Frame)
- Fig. 896: Awl V.A.G 1636
- Fig. 897: Cover And Cushion For Solid Rear Backrest Remove/Install Components (Separating Cover From Upholstery)
- Fig. 898: Divided Backrest Cover And Upholstery Remove/Install Components (1/3 Backrest Cover And Upholstery, Removing And Installing)
- Fig. 899: Divided Backrest Cover And Upholstery Remove/Install Components (2/3 Backrest Cover And Upholstery, Removing And Installing)
- Fig. 900: Divided Backrest Cover And Upholstery Remove/Install Components (2/3 Backrest Cover And Upholstery, Removing And Installing)
- Fig. 901: Lock Cylinder Remove/Install Components
- Fig. 902: Lock Cylinder Remove/Install Components
- Fig. 903: Pushing Release Button And Pulling Headrest Upward As Far As Possible
- Fig. 904: Pressing Release Button On Headrest Until Stop
- Fig. 905: Headrest Guides, Removing And Installing
- Fig. 906: Hook 3438
- Fig. 907: Pushing Release Button And Pulling Headrest Upward As Far As Possible
- Fig. 908: Guiding Hook 3438 Into Hole In Headrest And Engage Hook At Retaining Tab
- Fig. 909: Hook 3438
- Fig. 910: Pushing Release Button And Pulling Headrest Upward As Far As Possible
- Fig. 911: Guiding Hook 3438 Into Hole In Headrest And Engaging Hook At Retaining Tab
- Fig. 912: Guiding Lug Of Headrest Guide Must Engage In Cut-Out Of Mount For Headrest Guide
- Fig. 913: Frame For Ski Sack (Foldable Rear Seat) Remove/Install Components
- Fig. 914: Ski Sack (Folding Rear Seat Backrest) Remove/Install Components
- Fig. 915: Ski Sack Cover, Cutting Out (Non-Folding Seat)
- Tightening torques