Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



1.Scribe a mark between the differential case halves to be used during assembly. Also, mark the pinion mate shafts and corresponding ramps for assembly in original locations.
2.Clamp differential assembly in a soft jaw vise.

{tag}996850645@

3.Loosen but do not remove the case half retaining bolts, Fig. 17.
4.Place assembly on bench with the ring gear half down and remove case half retaining screws.
5.Remove the cover half of the case.
6.Remove upper mate shaft, side gear, side gear ring and clutch pack. Retain parts with cover half of case so they can be installed in original position.
7.Remove lower mate shaft, side gear, side gear ring and clutch pack from drive gear case half.
1.Scribe a mark between the differential case halves to be used during assembly. Also, mark the pinion mate shafts and corresponding ramps for assembly in original locations.
2.Clamp differential assembly in a soft jaw vise.

Fig.17 Powr-Lok Locking DifferentialFig.17 Powr-Lok Locking Differential


3.Loosen but do not remove the case half retaining bolts, Fig. 17.
4.Place assembly on bench with the ring gear half down and remove case half retaining screws.
5.Remove the cover half of the case.
6.Remove upper mate shaft, side gear, side gear ring and clutch pack. Retain parts with cover half of case so they can be installed in original position.
7.Remove lower mate shaft, side gear, side gear ring and clutch pack from drive gear case half.



This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20