Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



{tag}996726833@

1.Remove drive pinion shaft nut, Fig. 3.

{tag}996732104@

2.Remove companion flange from drive pinion shaft, Fig. 4.
3.Using suitable puller, remove pinion seal.
4.Remove the pinion, bearing, and retainer assembly from carrier housing. Extreme care must be taken not to damage mounting surfaces of retainer and carrier.
5.Place protective sleeve on pinion pilot bearing surface and press drive pinion shaft out of pinion retainer.
6.Using Pinion Bearing Cone Removal tool No. T71P-4621-B or equivalent, press pinion shaft out of pinion rear bearing cone.
7.Clean and inspect all parts.
Fig. 3 Removing Pinion Shaft NutFig. 3 Removing Pinion Shaft Nut


1.Remove drive pinion shaft nut, Fig. 3.

{tag}996732104@

2.Remove companion flange from drive pinion shaft, Fig. 4.
3.Using suitable puller, remove pinion seal.
4.Remove the pinion, bearing, and retainer assembly from carrier housing. Extreme care must be taken not to damage mounting surfaces of retainer and carrier.
5.Place protective sleeve on pinion pilot bearing surface and press drive pinion shaft out of pinion retainer.
6.Using Pinion Bearing Cone Removal tool No. T71P-4621-B or equivalent, press pinion shaft out of pinion rear bearing cone.
7.Clean and inspect all parts.
{tag}996726833@

1.Remove drive pinion shaft nut, Fig. 3.

Fig. 4 Removing Companion FlangeFig. 4 Removing Companion Flange


2.Remove companion flange from drive pinion shaft, Fig. 4.
3.Using suitable puller, remove pinion seal.
4.Remove the pinion, bearing, and retainer assembly from carrier housing. Extreme care must be taken not to damage mounting surfaces of retainer and carrier.
5.Place protective sleeve on pinion pilot bearing surface and press drive pinion shaft out of pinion retainer.
6.Using Pinion Bearing Cone Removal tool No. T71P-4621-B or equivalent, press pinion shaft out of pinion rear bearing cone.
7.Clean and inspect all parts.
Fig. 3 Removing Pinion Shaft NutFig. 3 Removing Pinion Shaft Nut


1.Remove drive pinion shaft nut, Fig. 3.

Fig. 4 Removing Companion FlangeFig. 4 Removing Companion Flange


2.Remove companion flange from drive pinion shaft, Fig. 4.
3.Using suitable puller, remove pinion seal.
4.Remove the pinion, bearing, and retainer assembly from carrier housing. Extreme care must be taken not to damage mounting surfaces of retainer and carrier.
5.Place protective sleeve on pinion pilot bearing surface and press drive pinion shaft out of pinion retainer.
6.Using Pinion Bearing Cone Removal tool No. T71P-4621-B or equivalent, press pinion shaft out of pinion rear bearing cone.
7.Clean and inspect all parts.



This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20