Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



REMOVAL

{tag}994984312@


1.Disconnect coupling at transmission with clutch coupling tool T88T-70522-A or equivalent by sliding white plastic sleeve toward slave cylinder while tugging on tube.
2.Remove transmission.
3.Remove slave cylinder retaining bolts, then the slave cylinder.

INSTALLATION

{tag}994993602@


1.Reverse procedure to install, noting the following:
a.Position slave cylinder over transmission input shaft with bleed screw and coupling facing left side of transmission.
b.Torque slave cylinder retaining bolts to 15-20 ft lbs.
c.Bleed system if required.REMOVAL





1.Disconnect coupling at transmission with clutch coupling tool T88T-70522-A or equivalent by sliding white plastic sleeve toward slave cylinder while tugging on tube.
2.Remove transmission.
3.Remove slave cylinder retaining bolts, then the slave cylinder.

INSTALLATION

{tag}994993602@


1.Reverse procedure to install, noting the following:
a.Position slave cylinder over transmission input shaft with bleed screw and coupling facing left side of transmission.
b.Torque slave cylinder retaining bolts to 15-20 ft lbs.
c.Bleed system if required.REMOVAL

{tag}994984312@


1.Disconnect coupling at transmission with clutch coupling tool T88T-70522-A or equivalent by sliding white plastic sleeve toward slave cylinder while tugging on tube.
2.Remove transmission.
3.Remove slave cylinder retaining bolts, then the slave cylinder.

INSTALLATION





1.Reverse procedure to install, noting the following:
a.Position slave cylinder over transmission input shaft with bleed screw and coupling facing left side of transmission.
b.Torque slave cylinder retaining bolts to 15-20 ft lbs.
c.Bleed system if required.REMOVAL





1.Disconnect coupling at transmission with clutch coupling tool T88T-70522-A or equivalent by sliding white plastic sleeve toward slave cylinder while tugging on tube.
2.Remove transmission.
3.Remove slave cylinder retaining bolts, then the slave cylinder.

INSTALLATION





1.Reverse procedure to install, noting the following:
a.Position slave cylinder over transmission input shaft with bleed screw and coupling facing left side of transmission.
b.Torque slave cylinder retaining bolts to 15-20 ft lbs.
c.Bleed system if required.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20