Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



1.Remove clutch slave cylinder.
2.Remove transmission.
3.On models not equipped with a clutch housing dust cover, remove starter motor and clutch housing.
4.On models equipped with a clutch housing dust cover, remove dust cover and the release lever from housing.
5.On all models, mark clutch assembly and flywheel for assembly reference.
6.Remove pressure plate and cover assembly and the clutch disc from flywheel. Loosen attaching bolts evenly to relieve spring tension without distorting cover.
7.Reverse procedure to install, noting the following:
a.Apply a light coat of suitable lithium base grease to release lever fingers and lever trunnion, fulcrum or pivot ball. Do not grease the release lever pivot assembly on Econoline models.
b.Fill release bearing hub annular groove with suitable grease.
c.If service is necessary to the slave cylinder, care must be taken during installation to ensure both tabs on the spring clip are properly seated into place on the flywheel housing. Incorrectly seated clips could work loose from the housing and cause the slave cylinder to become disengaged, resulting in an inoperative clutch system and potential damage to the slave cylinder internal components.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20