Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

{tag}933957809@


11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

{tag}933953953@


10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

{tag}933948888@


8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

{tag}933944440@


6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

{tag}933940382@


4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

{tag}933936430@


3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


{tag}933931762@

1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.

ASSEMBLE


Installing Thrust Washer No. 7D428Installing Thrust Washer No. 7D428


1.Lubricate and place thrust washer onto intermediate brake drum.
2.Install forward clutch onto intermediate brake drum by rotating until seated fully.

Needle Bearing Assembly InstallationNeedle Bearing Assembly Installation



3.Lubricate and install needle bearing assembly onto intermediate brake drum and forward clutch assembly. Ensure notched inner race is facing up.

Thrust Washer No. 7D090 InstallationThrust Washer No. 7D090 Installation



4.Grease plastic thrust washer No. 7D090 and place onto forward clutch hub.
5.Place forward clutch hub into intermediate brake drum and forward clutch assemblies.

Thrust Washer Installation On Forward Planetary CarrierThrust Washer Installation On Forward Planetary Carrier



6.Grease thrust washer and place onto forward planetary carrier.
7.Place forward planetary carrier into assembly.

Needle Bearing Assembly Installation On Forward Carrier AssemblyNeedle Bearing Assembly Installation On Forward Carrier Assembly



8.Lubricate and install needle bearing assembly into forward carrier assembly, noting the following:
a.Ensure notched inner race surface is facing up.
9.Align input shell notches with intermediate brake drum lugs, then install input shell onto assembly by rotating until seated fully.

Installing Needle Bearing Assembly No. 7F374Installing Needle Bearing Assembly No. 7F374



10.Install needle bearing assembly No. 7F374 into front end of forward clutch assembly.

Clutch Replacer Tool InstallationClutch Replacer Tool Installation



11.Install tool as shown, in the Clutch Replacer Tool Installation image, and proceed with transmission assembly.




This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20