Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



STALL TEST

CAUTION: Apply service and parking brakes while performing each stall test. After testing each range, move selector lever to Neutral and run engine for fifteen seconds to allow converter to cool.

1.Connect tachometer to engine.
2.Press accelerator pedal to floor, Wide Open Throttle (WOT) in each range. Note RPM reached in each range.

{tag}903216815@


3.Refer to the Stall Speed Specifications Chart, for stall speed specifications.

{tag}903210205@


4.If stall speed is above specified limits, refer to the Stall Speed Diagnosis Chart.
5.If stall speed is below specified limits, proceed as follows:
a.Check engine tune-up.
b.If engine is satisfactory, remove torque converter and check torque converter reactor one-way clutch for slippage.

STALL TEST

CAUTION: Apply service and parking brakes while performing each stall test. After testing each range, move selector lever to Neutral and run engine for fifteen seconds to allow converter to cool.

1.Connect tachometer to engine.
2.Press accelerator pedal to floor, Wide Open Throttle (WOT) in each range. Note RPM reached in each range.

Stall Speed Specifications ChartStall Speed Specifications Chart



3.Refer to the Stall Speed Specifications Chart, for stall speed specifications.

{tag}903210205@


4.If stall speed is above specified limits, refer to the Stall Speed Diagnosis Chart.
5.If stall speed is below specified limits, proceed as follows:
a.Check engine tune-up.
b.If engine is satisfactory, remove torque converter and check torque converter reactor one-way clutch for slippage.

STALL TEST

CAUTION: Apply service and parking brakes while performing each stall test. After testing each range, move selector lever to Neutral and run engine for fifteen seconds to allow converter to cool.

1.Connect tachometer to engine.
2.Press accelerator pedal to floor, Wide Open Throttle (WOT) in each range. Note RPM reached in each range.

{tag}903216815@


3.Refer to the Stall Speed Specifications Chart, for stall speed specifications.

Stall Speed Diagnosis ChartStall Speed Diagnosis Chart



4.If stall speed is above specified limits, refer to the Stall Speed Diagnosis Chart.
5.If stall speed is below specified limits, proceed as follows:
a.Check engine tune-up.
b.If engine is satisfactory, remove torque converter and check torque converter reactor one-way clutch for slippage.

STALL TEST

CAUTION: Apply service and parking brakes while performing each stall test. After testing each range, move selector lever to Neutral and run engine for fifteen seconds to allow converter to cool.

1.Connect tachometer to engine.
2.Press accelerator pedal to floor, Wide Open Throttle (WOT) in each range. Note RPM reached in each range.

Stall Speed Specifications ChartStall Speed Specifications Chart



3.Refer to the Stall Speed Specifications Chart, for stall speed specifications.

Stall Speed Diagnosis ChartStall Speed Diagnosis Chart



4.If stall speed is above specified limits, refer to the Stall Speed Diagnosis Chart.
5.If stall speed is below specified limits, proceed as follows:
a.Check engine tune-up.
b.If engine is satisfactory, remove torque converter and check torque converter reactor one-way clutch for slippage.




This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20