Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



REMOVAL
1.Raise and support vehicle.
2.On 4WD models, remove front and rear driveshafts.
3.On 2WD models, remove rear driveshaft.
4.On all models, remove transmission mounting pad attaching nuts and bolts.
5.On 4WD models, remove transfer case shift linkage to shift lever.
6.On 4WD models, remove four-wheel drive switch connector from transfer case. Do not overextend tabs.
7.On all models, pry wire harness locator from extension housing wire bracket.
8.On 4WD models, disconnect wire harness locators from left side of crossmember.
9.On all models, remove speedometer cable.
10.On 4WD models, remove transfer case vent hose.
11.On 4WD models, position a suitable jack under transfer case.
12.On 2WD models, remove nine bolts securing extension housing, then remove extension housing.
13.On 4WD models, remove nine bolts securing extension housing, then slide transfer case to gain clearance and remove housing.

INSTALLATION
1.On all models, reverse procedure to install, noting the following:
a.Refer to Technical Service Bulletins (TSB) for related information.
b.On 2WD models, torque extension housing bolts to 20-29 ft lbs.
c.On 4WD models, torque extension housing bolts to 24-40 ft lbs.
d.Torque mounting pad bolts to 60-80 ft lbs.



This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20