Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



REMOVAL

CAUTION: All parts must be handled carefully to avoid nicking or burring the bearing or mating surfaces. Lubricate all internal parts with clean automatic transmission fluid before assembling them. Do not use any other lubricants except on gaskets and thrust washers. These may be coated with petroleum jelly to facilitate assembly. Always use new gaskets and seals when assembling transmission.

{tag}830006066@


1.Working from inside of case, carefully drive on servo apply lever to remove cup plug. The shaft can be withdrawn from the case by hand.

INSTALLATION
1.Drive the cup plug into position using fabricated tool shown in the Cup Plug Installation image. Make certain the plug is flush with the counterbore.

NOTE: Coat the plug with Loctite before installation.

REMOVAL

CAUTION: All parts must be handled carefully to avoid nicking or burring the bearing or mating surfaces. Lubricate all internal parts with clean automatic transmission fluid before assembling them. Do not use any other lubricants except on gaskets and thrust washers. These may be coated with petroleum jelly to facilitate assembly. Always use new gaskets and seals when assembling transmission.

Cup Plug InstallationCup Plug Installation



1.Working from inside of case, carefully drive on servo apply lever to remove cup plug. The shaft can be withdrawn from the case by hand.

INSTALLATION
1.Drive the cup plug into position using fabricated tool shown in the Cup Plug Installation image. Make certain the plug is flush with the counterbore.

NOTE: Coat the plug with Loctite before installation.




This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20