Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



{tag}829848435@


INTERMEDIATE BAND ADJUSTMENT

NOTE: When making the intermediate band adjustment, the locknut must be discarded and a new one installed each time the band is adjusted. Refer to service bulletins section for additional information on this procedure.

1.Clean dirt from the band adjusting screw. Remove and discard locknut.
2.Install a new locknut and tighten the adjusting screw to 14 Nm (10 ft lbs).
3.Back the screw off exactly 1.5 turns.
4.Hold the adjusting screw from turning and torque the locknut to 48-61 Nm(35-40 ft lbs).




INTERMEDIATE BAND ADJUSTMENT

NOTE: When making the intermediate band adjustment, the locknut must be discarded and a new one installed each time the band is adjusted. Refer to service bulletins section for additional information on this procedure.

1.Clean dirt from the band adjusting screw. Remove and discard locknut.
2.Install a new locknut and tighten the adjusting screw to 14 Nm (10 ft lbs).
3.Back the screw off exactly 1.5 turns.
4.Hold the adjusting screw from turning and torque the locknut to 48-61 Nm(35-40 ft lbs).



This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20