Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



NOTE: LED will turn GREEN when solenoid activates and turn OFF when deactivated. LED will turn RED if an activated solenoid/harness is shorted to B+. LED will remain OFF if an activated solenoid/harness is shorted to ground or on continuity.

1.Set tester Bench/Drive switch to BENCH mode.
2.Set voltmeter to 20 volt DC range.
3.Connect voltmeter positive lead to the appropriate solenoid VPWR. Connect voltmeter negative lead to the appropriate solenoid.
4.Using a DVOM, check for voltage across each solenoid by activating the solenoid switches. Depress the appropriate switch. The LED should illuminate, the voltage should change and an audible click may be heard. If LED does not illuminate, a short to ground condition exists.

NOTE: TCC (CCC) solenoid click may or may not be audible.

5.Observe and record values.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20