Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



1.Record and then erase Quick Test codes.
2.Warm engine to normal operating temperature.
3.Make sure transmission fluid level is correct.
4.With transmission in DRIVE, press TCS (LED lamp should illuminate) and moderately accelerate from stop to 40 mph (64 km/h). This allows transmission to shift into third gear. Hold speed and throttle opening steady for a minimum of 15 seconds (30 seconds above 4000 altitude).
5.Press TCS (LED lamp should turn off) and accelerate from 40 mph (64 Km/h) to 50 mph (80 km/h). This allows transmission to shift into fourth gear. Hold speed and throttle position steady for a minimum of 15 seconds.
6.With transmission in fourth gear and maintaining steady speed and throttle opening, lightly apply and release brake (to operate stoplamps). Then hold speed and throttle steady for an additional five seconds (minimum).
7.Brake to a stop and remain stopped for a minimum of 20 seconds.
8.Repeat Steps 4 through 6 at least five times.
9.Perform Quick Test and record continuous codes.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20