Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



REMOVAL:
1.Disconnect both battery ground cables and drain fuel to a level (approximately 3/4 full) below fuel tank filler connection by using Rotunda 034-00001 Fuel Storage Tanker or equivalent.
2.Loosen clamp attaching filler pipe hose to fuel tank filler neck. Disconnect filler pipe hose, pulling along rubber inner tube from filler neck.
3.Remove three retainer screws that attach filler pipe neck to body/box fuel filler housing.
4.Remove fuel filler pipe from vehicle.
5.Remove hose and clamps. Replace cracked or leaking hoses or other damaged parts.


INSTALLATION:
1.Position fuel filler pipe in vehicle.
2.Position clamp on filler pipe hose-to-filler pipe neck connection and insert rubber inner tube in filler neck. Make sure that the inner tube is not kinked or twisted in the neck and in the outer filler hose.
3.Install three retainer screws attaching filler pipe neck to body/box fuel filler housing. Tighten to 2.7-3.7 Nm (24-32 in lb).
4.Adjust hose to obtain snug filler pipe installation. Tighten hose clamps to 3-4 Nm (25-35 in lb). Make certain clamps are forward of flange on filler pipe to ensure a leakproof connection.
5.Fill tank with fuel. Install filler cap and check for leaks.
6.Connect both battery ground cables.



This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20