Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



PURPOSE
The fuel injection pump provides a means to accurately meter and deliver fuel to a nozzle in each cylinder at high pressure and at precisely timed intervals.


{tag}642698162@


OPERATION
Fuel flows into the injection pump inlet through an inlet filter screen (1). Fuel then flows to the vane-type fuel transfer pump (2). Excess fuel from the transfer pump is bypassed through the pressure regulator assembly (3) to the suction side.

Fuel under the transfer pump pressure flows through the center of the transfer pump rotor, past the rotor retainers (4) into the hydraulic head. It will then flow through a connecting passage (5) in the head to the automatic advance (6) and up through a radial passage to the metering valve (8). The position of the metering valve, controlled by the governor, regulates fuel flow into the radial charging passage (9) which incorporates the head charging ports. As the rotor revolves, the two rotor inlet passages (10) align with the charging ports in the hydraulic head, allowing fuel to flow into the pumping chamber. With additional rotation, the inlet passages move out of alignment and the discharge port of the rotor aligns with one of the head outlets. While the discharge port is opened, the rollers (11) contact the cam lobes forcing the plungers together. Fuel trapped between the plungers is then pressurized and delivered by the nozzle to the combustion chamber.

The air vent passage (12) in the hydraulic head connects the outlet side of the transfer pump with the pump housing. This allows air and some fuel to be bled back to the fuel tank through the return lines. Fuel bypassed in this way fills the housing, lubricates the internal components, cools the pump, and carries off any small air bubbles.


CONSTRUCTION
The injection pump is an opposed plunger, inlet metered, positive displacement, distributor type pump. The pump incorporates a single pumping chamber, an integral fuel transfer pump and governor, and an automatic injection advance mechanism. ON/OFF fuel control is provided by means of an electric solenoid located in the housing cover.PURPOSE
The fuel injection pump provides a means to accurately meter and deliver fuel to a nozzle in each cylinder at high pressure and at precisely timed intervals.


Injection Pump Internal View Injection Pump Internal View



OPERATION
Fuel flows into the injection pump inlet through an inlet filter screen (1). Fuel then flows to the vane-type fuel transfer pump (2). Excess fuel from the transfer pump is bypassed through the pressure regulator assembly (3) to the suction side.

Fuel under the transfer pump pressure flows through the center of the transfer pump rotor, past the rotor retainers (4) into the hydraulic head. It will then flow through a connecting passage (5) in the head to the automatic advance (6) and up through a radial passage to the metering valve (8). The position of the metering valve, controlled by the governor, regulates fuel flow into the radial charging passage (9) which incorporates the head charging ports. As the rotor revolves, the two rotor inlet passages (10) align with the charging ports in the hydraulic head, allowing fuel to flow into the pumping chamber. With additional rotation, the inlet passages move out of alignment and the discharge port of the rotor aligns with one of the head outlets. While the discharge port is opened, the rollers (11) contact the cam lobes forcing the plungers together. Fuel trapped between the plungers is then pressurized and delivered by the nozzle to the combustion chamber.

The air vent passage (12) in the hydraulic head connects the outlet side of the transfer pump with the pump housing. This allows air and some fuel to be bled back to the fuel tank through the return lines. Fuel bypassed in this way fills the housing, lubricates the internal components, cools the pump, and carries off any small air bubbles.


CONSTRUCTION
The injection pump is an opposed plunger, inlet metered, positive displacement, distributor type pump. The pump incorporates a single pumping chamber, an integral fuel transfer pump and governor, and an automatic injection advance mechanism. ON/OFF fuel control is provided by means of an electric solenoid located in the housing cover.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20