Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



NOTE: It may be necessary to service non-EEC-IV faults before running the quick test.
Continuous codes recorded in this step will be used for diagnosis in ADDRESSING CONTINUOUS MEMORY DTC after a pass code is received in both Key On Engine Off (KOEO) and Key On Engine Running (KOER) self-tests.
Deviation from this procedure may cause false codes to be output.
1.START engine and bring to normal operating temperature.
NOTE: If engine will not start or stalls after starting, proceed with the Key On Engine Off (KOEO) self test.
2.Turn the key OFF, then wait ten seconds.
3.Fully depress throttle, then ACTIVATE the self test (refer to scan tool manual for instructions).
4.Turn the ignition key to the ON position.
5.Record all codes received.
6.Turn the ignition key OFF, DEACTIVATE the self test, and release the throttle.
7.If a pass code (11 or 111) is received for hard codes (11/111-10-any code), proceed with next step.
8.If any hard codes are received, refer to the appropriate diagnostic trouble code chart for diagnostic path.




This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20