Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



Do not operate the engine until the fan has been first checked for possible cracks and separations.
Run engine at a fast idle speed (1000 RPM) until normal operating temperature is reached. This process can be done more quickly by blocking off the front of the radiator with cardboard. Regardless of temperatures, unit must be operated for at least five minutes immediately before being tested.
Stop engine and using a glove or a cloth to protect the hand, immediately check the effort required to turn the fan. If considerable effort is required, it can be assumed that coupling is operating satisfactorily. If very little effort is required to turn the fan, it is an indication that the coupling is not operating properly and should be replaced.

{tag}423499636@

The clutch fan may be tested while vehicle is being driven. To check, disconnect the bimetal spring, Fig. 2, and rotate 90° counterclockwise. This disables the temperature-controlled, free-wheeling feature and the clutch performs like a conventional fan. If this cures the overheating condition, replace the clutch fan.
Do not operate the engine until the fan has been first checked for possible cracks and separations.
Run engine at a fast idle speed (1000 RPM) until normal operating temperature is reached. This process can be done more quickly by blocking off the front of the radiator with cardboard. Regardless of temperatures, unit must be operated for at least five minutes immediately before being tested.
Stop engine and using a glove or a cloth to protect the hand, immediately check the effort required to turn the fan. If considerable effort is required, it can be assumed that coupling is operating satisfactorily. If very little effort is required to turn the fan, it is an indication that the coupling is not operating properly and should be replaced.

Bi-Metallic Coiled Spring RemovalBi-Metallic Coiled Spring Removal


The clutch fan may be tested while vehicle is being driven. To check, disconnect the bimetal spring, Fig. 2, and rotate 90° counterclockwise. This disables the temperature-controlled, free-wheeling feature and the clutch performs like a conventional fan. If this cures the overheating condition, replace the clutch fan.



This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20