Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



{tag}374804163@


1.Disconnect battery ground cables, then drain cooling system.
2.Remove fan shroud, then the fan and clutch assembly.

NOTE: To determine whether the fan nut threads are right or left handed, refer to "Determining Thread Direction of Fan Clutch Retaining Nut".

3.Remove all drive belts, then the water pump pulley.
4.Disconnect heater hose from water pump, then remove heater hose fitting from pump.
5.Remove alternator adjusting arm and adjusting arm bracket.
6.Remove A/C compressor and brackets and position aside.
7.Remove power steering pump and bracket and position aside.
8.Remove water pump attaching bolts, then the pump.
9.Reverse procedure to install. Apply RTV sealer to two top and two bottom bolts, Fig. 22. Apply suitable pipe sealant to heater hose fitting. Tighten water pump attaching bolts to specifications.Fig. 22 Water Pump InstallationFig. 22 Water Pump Installation



1.Disconnect battery ground cables, then drain cooling system.
2.Remove fan shroud, then the fan and clutch assembly.

NOTE: To determine whether the fan nut threads are right or left handed, refer to "Determining Thread Direction of Fan Clutch Retaining Nut".

3.Remove all drive belts, then the water pump pulley.
4.Disconnect heater hose from water pump, then remove heater hose fitting from pump.
5.Remove alternator adjusting arm and adjusting arm bracket.
6.Remove A/C compressor and brackets and position aside.
7.Remove power steering pump and bracket and position aside.
8.Remove water pump attaching bolts, then the pump.
9.Reverse procedure to install. Apply RTV sealer to two top and two bottom bolts, Fig. 22. Apply suitable pipe sealant to heater hose fitting. Tighten water pump attaching bolts to specifications.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20