Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



{tag}371438014@
{tag}371446166@







1.Disconnect battery ground cables, then drain cooling system.
2.Remove air cleaner. Install intake air opening cap, tool T83T-9424-A or equivalent.
3.Remove fan shroud, then the fan and clutch assembly. The fan retaining nut has lefthand threads.
4.Remove fuel injection pump, injection pump adapter and water pump.
5.Raise and support vehicle.
6.Remove torsional damper, then disconnect ground cables from front of engine.
7.Remove front cover to engine block and oil pan attaching bolts.
8.Lower vehicle.
9.Remove front cover to engine block attaching bolts, then the front cover.
10.Using seal removal tool T80T-4000-W or equivalent, remove seal from front cover, Fig. 12.
11.Reverse procedure to install. Lubricate new oil seal with DOAZ-19584-A grease, or equivalent. Apply a bead of sealant to mating surface as shown in Fig. 13.Fig. 12 Front Cover Seal ReplacementFig. 12 Front Cover Seal Replacement

{tag}371446166@







1.Disconnect battery ground cables, then drain cooling system.
2.Remove air cleaner. Install intake air opening cap, tool T83T-9424-A or equivalent.
3.Remove fan shroud, then the fan and clutch assembly. The fan retaining nut has lefthand threads.
4.Remove fuel injection pump, injection pump adapter and water pump.
5.Raise and support vehicle.
6.Remove torsional damper, then disconnect ground cables from front of engine.
7.Remove front cover to engine block and oil pan attaching bolts.
8.Lower vehicle.
9.Remove front cover to engine block attaching bolts, then the front cover.
10.Using seal removal tool T80T-4000-W or equivalent, remove seal from front cover, Fig. 12.
11.Reverse procedure to install. Lubricate new oil seal with DOAZ-19584-A grease, or equivalent. Apply a bead of sealant to mating surface as shown in Fig. 13.{tag}371438014@
Fig. 13 Front Cover InstallationFig. 13 Front Cover Installation








1.Disconnect battery ground cables, then drain cooling system.
2.Remove air cleaner. Install intake air opening cap, tool T83T-9424-A or equivalent.
3.Remove fan shroud, then the fan and clutch assembly. The fan retaining nut has lefthand threads.
4.Remove fuel injection pump, injection pump adapter and water pump.
5.Raise and support vehicle.
6.Remove torsional damper, then disconnect ground cables from front of engine.
7.Remove front cover to engine block and oil pan attaching bolts.
8.Lower vehicle.
9.Remove front cover to engine block attaching bolts, then the front cover.
10.Using seal removal tool T80T-4000-W or equivalent, remove seal from front cover, Fig. 12.
11.Reverse procedure to install. Lubricate new oil seal with DOAZ-19584-A grease, or equivalent. Apply a bead of sealant to mating surface as shown in Fig. 13.Fig. 12 Front Cover Seal ReplacementFig. 12 Front Cover Seal Replacement

Fig. 13 Front Cover InstallationFig. 13 Front Cover Installation








1.Disconnect battery ground cables, then drain cooling system.
2.Remove air cleaner. Install intake air opening cap, tool T83T-9424-A or equivalent.
3.Remove fan shroud, then the fan and clutch assembly. The fan retaining nut has lefthand threads.
4.Remove fuel injection pump, injection pump adapter and water pump.
5.Raise and support vehicle.
6.Remove torsional damper, then disconnect ground cables from front of engine.
7.Remove front cover to engine block and oil pan attaching bolts.
8.Lower vehicle.
9.Remove front cover to engine block attaching bolts, then the front cover.
10.Using seal removal tool T80T-4000-W or equivalent, remove seal from front cover, Fig. 12.
11.Reverse procedure to install. Lubricate new oil seal with DOAZ-19584-A grease, or equivalent. Apply a bead of sealant to mating surface as shown in Fig. 13.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20