Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



{tag}335607861@
{tag}335611223@


1.Disconnect battery ground cables.
2.On E-Series models, remove engine cover.
3.On all models, remove air cleaner and place a suitable cover over intake manifold opening.
4.On E-Series models, disconnect fuel inlet and return lines from fuel filter, then remove fuel filter and bracket as an assembly.
5.On all models, remove injection pump.
6.On F-Series models, disconnect fuel return lines from rear injection nozzles and remove return lines to fuel tank.
7.On all models, disconnect engine harness ground wire from rear left of cylinder head, then remove engine wiring harness from engine.
8.Remove glow plug harness and controller.
9.Remove intake manifold attaching bolts and the intake manifold, Fig. 6.
10.Reverse procedure to install. Tighten attaching bolts to specifications in sequence shown in Fig. 7.Fig. 6 Manifold AssembliesFig. 6 Manifold Assemblies

{tag}335611223@


1.Disconnect battery ground cables.
2.On E-Series models, remove engine cover.
3.On all models, remove air cleaner and place a suitable cover over intake manifold opening.
4.On E-Series models, disconnect fuel inlet and return lines from fuel filter, then remove fuel filter and bracket as an assembly.
5.On all models, remove injection pump.
6.On F-Series models, disconnect fuel return lines from rear injection nozzles and remove return lines to fuel tank.
7.On all models, disconnect engine harness ground wire from rear left of cylinder head, then remove engine wiring harness from engine.
8.Remove glow plug harness and controller.
9.Remove intake manifold attaching bolts and the intake manifold, Fig. 6.
10.Reverse procedure to install. Tighten attaching bolts to specifications in sequence shown in Fig. 7.{tag}335607861@
Fig. 7 Intake Manifold Tightening AssemblyFig. 7 Intake Manifold Tightening Assembly



1.Disconnect battery ground cables.
2.On E-Series models, remove engine cover.
3.On all models, remove air cleaner and place a suitable cover over intake manifold opening.
4.On E-Series models, disconnect fuel inlet and return lines from fuel filter, then remove fuel filter and bracket as an assembly.
5.On all models, remove injection pump.
6.On F-Series models, disconnect fuel return lines from rear injection nozzles and remove return lines to fuel tank.
7.On all models, disconnect engine harness ground wire from rear left of cylinder head, then remove engine wiring harness from engine.
8.Remove glow plug harness and controller.
9.Remove intake manifold attaching bolts and the intake manifold, Fig. 6.
10.Reverse procedure to install. Tighten attaching bolts to specifications in sequence shown in Fig. 7.Fig. 6 Manifold AssembliesFig. 6 Manifold Assemblies

Fig. 7 Intake Manifold Tightening AssemblyFig. 7 Intake Manifold Tightening Assembly



1.Disconnect battery ground cables.
2.On E-Series models, remove engine cover.
3.On all models, remove air cleaner and place a suitable cover over intake manifold opening.
4.On E-Series models, disconnect fuel inlet and return lines from fuel filter, then remove fuel filter and bracket as an assembly.
5.On all models, remove injection pump.
6.On F-Series models, disconnect fuel return lines from rear injection nozzles and remove return lines to fuel tank.
7.On all models, disconnect engine harness ground wire from rear left of cylinder head, then remove engine wiring harness from engine.
8.Remove glow plug harness and controller.
9.Remove intake manifold attaching bolts and the intake manifold, Fig. 6.
10.Reverse procedure to install. Tighten attaching bolts to specifications in sequence shown in Fig. 7.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20