Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



{tag}340823767@
{tag}340835220@


1.Disconnect battery ground cables.
2.Remove fan shroud halves.
3.Raise and support vehicle.
4.Remove mount to crossmember attaching nuts, Figs. 4 and 5.
5.Disconnect muffler inlet pipes at exhaust manifolds.
6.Remove engine mount to block attaching bolts.
7.Lower vehicle.
8.Install suitable engine lifting equipment.
9.Lift engine enough to remove mounts and brackets.
10.Reverse procedure to install.Fig. 4 Engine MountsFig. 4 Engine Mounts

{tag}340835220@


1.Disconnect battery ground cables.
2.Remove fan shroud halves.
3.Raise and support vehicle.
4.Remove mount to crossmember attaching nuts, Figs. 4 and 5.
5.Disconnect muffler inlet pipes at exhaust manifolds.
6.Remove engine mount to block attaching bolts.
7.Lower vehicle.
8.Install suitable engine lifting equipment.
9.Lift engine enough to remove mounts and brackets.
10.Reverse procedure to install.{tag}340823767@
Fig. 5 Engine MountsFig. 5 Engine Mounts



1.Disconnect battery ground cables.
2.Remove fan shroud halves.
3.Raise and support vehicle.
4.Remove mount to crossmember attaching nuts, Figs. 4 and 5.
5.Disconnect muffler inlet pipes at exhaust manifolds.
6.Remove engine mount to block attaching bolts.
7.Lower vehicle.
8.Install suitable engine lifting equipment.
9.Lift engine enough to remove mounts and brackets.
10.Reverse procedure to install.Fig. 4 Engine MountsFig. 4 Engine Mounts

Fig. 5 Engine MountsFig. 5 Engine Mounts



1.Disconnect battery ground cables.
2.Remove fan shroud halves.
3.Raise and support vehicle.
4.Remove mount to crossmember attaching nuts, Figs. 4 and 5.
5.Disconnect muffler inlet pipes at exhaust manifolds.
6.Remove engine mount to block attaching bolts.
7.Lower vehicle.
8.Install suitable engine lifting equipment.
9.Lift engine enough to remove mounts and brackets.
10.Reverse procedure to install.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20