Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



FLUID CHANGE

NOTE: Normal maintenance and lubrication requirements do not necessitate periodic fluid changes. If a major failure has occurred in the transmission, it will have to be removed for service. At this time the converter must be thoroughly flushed to remove any foreign matter.

CAUTION: Use of a fluid other than specified could result in transmission malfunction and failure.

1.To drain the fluid, loosen pan attaching bolts and allow fluid to drain.
2.After fluid has drained to the level of the pan flange, remove pan bolts working from rear and both sides of pan to allow it to drop and drain slowly.
3.When fluid has stopped draining, remove and clean pan and screen. Discard pan gasket.
4.Using a new gasket, install pan.
5.Add recommended fluid to transmission through filler tube.
6.Run engine at idle speed for 2 minutes, and then run it at a fast idle until it reaches normal operating temperature.
7.Shift selector lever through all positions, place it at Park and check fluid level.
8.If necessary, add enough fluid to transmission to bring it to the Full mark on the dipstick.




This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20