Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



Belt Replacement

Conditions requiring belt replacement are excessive wear, severe glazing, frayed cords, etc. Replace any belt exhibiting any of these conditions.

NOTE:
Minor cracks in the ribbed side of the belt are considered acceptable.

1.Install a 15mm closed end wrench on the tensioner pulley bolt and rotate the tensioner arm away from the belt.
2.Remove old belt. Release tensioner slowly. Allowing the tensioner to snap back after the belt is removed may damage the tensioner.

{tag}211419270@

CAUTION:Make sure the belt is properly seated on all pulleys. One revolution of the engine with an incorrectly seated belt may snap tensile members in the belt.

3.Install new belt over pulleys making sure that all belt ribs are correctly seated in the pulley grooves.
4.Rotate the tensioner to position it on the drive belt.
Belt Replacement

Conditions requiring belt replacement are excessive wear, severe glazing, frayed cords, etc. Replace any belt exhibiting any of these conditions.

NOTE:
Minor cracks in the ribbed side of the belt are considered acceptable.

1.Install a 15mm closed end wrench on the tensioner pulley bolt and rotate the tensioner arm away from the belt.
2.Remove old belt. Release tensioner slowly. Allowing the tensioner to snap back after the belt is removed may damage the tensioner.

Belt AlignmentBelt Alignment


CAUTION:Make sure the belt is properly seated on all pulleys. One revolution of the engine with an incorrectly seated belt may snap tensile members in the belt.

3.Install new belt over pulleys making sure that all belt ribs are correctly seated in the pulley grooves.
4.Rotate the tensioner to position it on the drive belt.



This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20