Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



{tag}186452389@

CURB IDLE SPEED
1.Apply parking brake and block drive wheels.
2.Start engine and allow to reach normal operating temperature.
3.On manual transmission models, place transmission in NEUTRAL. On automatic transmission models, place transmission in DRIVE.
4.Using a suitable diesel engine tachometer (Rotunda 055-00108, or equivalent), check curb idle speed.
5.If idle speed is not 650 {tag}6| 50 RPM in DRIVE (AT) or NEUTRAL (MT), adjust by turning idle speed adjusting screw.
6.Accelerate engine momentarily. Recheck idle speed and adjust as necessary.

FAST IDLE SPEED
1.Place transmission in NEUTRAL (M/T) or PARK (A/T).
2.Start engine and allow to reach operating temperature.
3.Disconnect fast idle solenoid electrical connector.
4.Apply battery voltage to solenoid, then accelerate engine momentarily to set solenoid plunger.
5.Check fast idle speed setting.
6.If idle speed is not 825 {tag}6| 25 RPM, adjust fast idle speed by turning solenoid plunger.
7.Accelerate engine momentarily, then recheck fast idle speed setting.
8.Remove battery voltage from solenoid and connect electrical connector.

Idle Speed Adjusting ScrewsIdle Speed Adjusting Screws


CURB IDLE SPEED
1.Apply parking brake and block drive wheels.
2.Start engine and allow to reach normal operating temperature.
3.On manual transmission models, place transmission in NEUTRAL. On automatic transmission models, place transmission in DRIVE.
4.Using a suitable diesel engine tachometer (Rotunda 055-00108, or equivalent), check curb idle speed.
5.If idle speed is not 650 {tag}6| 50 RPM in DRIVE (AT) or NEUTRAL (MT), adjust by turning idle speed adjusting screw.
6.Accelerate engine momentarily. Recheck idle speed and adjust as necessary.

FAST IDLE SPEED
1.Place transmission in NEUTRAL (M/T) or PARK (A/T).
2.Start engine and allow to reach operating temperature.
3.Disconnect fast idle solenoid electrical connector.
4.Apply battery voltage to solenoid, then accelerate engine momentarily to set solenoid plunger.
5.Check fast idle speed setting.
6.If idle speed is not 825 {tag}6| 25 RPM, adjust fast idle speed by turning solenoid plunger.
7.Accelerate engine momentarily, then recheck fast idle speed setting.
8.Remove battery voltage from solenoid and connect electrical connector.




This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20