Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



REMOVAL

1.Disconnect battery ground cable and remove shield, if equipped.
2.Loosen vacuum pump adjustment bolt and pivot bolt, then slide pump downward and remove drive belt from pulley. If vacuum pump drive belt is to be replaced, alternator drive belt must be removed.
3.Remove hose clamp and disconnect pump from hose on manifold vacuum outlet fitting.
4.Remove pivot and adjustment bolts, then bolts retaining pump to adjustment plate.
5.Remove vacuum pump and adjustment plate. Vacuum pump is serviced as a unit. Do not attempt to disassemble.

INSTALLATION

1.Install pump to adjustment plate, then attaching bolts, torque attaching bolts to 11-18 ft. lbs.
2.Position pump and plate on vacuum pump bracket and loosely install pivot and adjustment bolts.
3.Connect hose from manifold vacuum outlet fitting to pump and install hose clamp.
4.Place vacuum pump drive belt on pulley and adjust belt tension to specifications, torque pivot and adjustment bolts to 11-18 ft. lbs. Alternator belt tension must be adjusted before vacuum pump belt tension is adjusted.
5.Install shield, if equipped, and connect battery ground cable.
6.Start engine and check operation of brake system. Brake light will remain on until vacuum builds up to normal level.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20