Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



Park/Neutral Position (PNP) Switch

1.Set the vehicle parking brake.

2.Set the transmission in the NEUTRAL position.

3.With the manual shift cable properly adjusted, loosed the switch attaching bolts.

4.Insert park neutral position switch Alignment Tool T91P-70010-A onto the park neutral position switch into the three slots provided on the switch actuator and terminal plate.

NOTE: Check to make sure that each leg of the tool is seated in its slot.

5.Leaving the alignment tool in place, tighten the attaching bolts to 7-8 Nm (55-75 in-lb).

6.Remove the alignment tool at this time. Adjustment can be confirmed visually by making sure the line etched in the actuator and the line etched in the housing are in a straight line when the switch is centered in neutral.

7.Check the operation of the switch. The backup lamps should operate only with the transmission selector lever in REVERSE. The vehicle should start only with the transmission selector lever in PARK or NEUTRAL.

{tag}154220950@
Park/Neutral Position (PNP) Switch

1.Set the vehicle parking brake.

2.Set the transmission in the NEUTRAL position.

3.With the manual shift cable properly adjusted, loosed the switch attaching bolts.

4.Insert park neutral position switch Alignment Tool T91P-70010-A onto the park neutral position switch into the three slots provided on the switch actuator and terminal plate.

NOTE: Check to make sure that each leg of the tool is seated in its slot.

5.Leaving the alignment tool in place, tighten the attaching bolts to 7-8 Nm (55-75 in-lb).

6.Remove the alignment tool at this time. Adjustment can be confirmed visually by making sure the line etched in the actuator and the line etched in the housing are in a straight line when the switch is centered in neutral.

7.Check the operation of the switch. The backup lamps should operate only with the transmission selector lever in REVERSE. The vehicle should start only with the transmission selector lever in PARK or NEUTRAL.

Park/Neutral Position (PNP) SwitchPark/Neutral Position (PNP) Switch




This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20