Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



Crew Cab Rear Seat

Removal and Installation
1.Open the "D" ring covers (if so equipped) and remove the bolt.
2.Disengage the detachable anchor tongue end from the detachable anchor (if so equipped) on the side of the seat by inserting a key into the slot in the anchor and lift the key upward.
3.Remove the bolt from the floor anchor end of the belt assembly.
4.Remove the affected trim panel(s).
5.Remove the belt loop (if so equipped) by carefully prying the loop away from the sheet metal.
6.Remove the bolt securing the retractor to the vehicle.
7.Remove the belt assembly from the vehicle.
8.If the belt loop is damaged, the belt loop can be removed from the belt assembly by carefully cutting through the slot located on the backside of the belt loop.

For installation, follow the removal procedures in reverse order. Tighten all anchor bolts to 35.0 {tag}6| 5.3 N.m (26.0 ft-lb {tag}6| 47 in-lb).

NOTE: To prevent damage to the safety belt webbing when cutting through the slot in the belt loop, place a smooth, flat hard object such as a metal ruler between the webbing and the backside of the belt loop.




This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20