Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



OPERATION
With the Ignition Switch in "RUN" and the heater control assembly in any position except "OFF", voltage is applied to the blower motor. With the blower motor switch in "LO", current flows through the blower motor and three resistors. In "MED-LO", current flows through two resistors. In "MED-HI", current flows through one resistor. In "HI", current does not flow through a resistor. With the A/C-Heater function selector switch in "OFF", the blower motor does not run.

Lever Position And Operation
OFF - Vacuum is applied to the outside-recirculate door vacuum motor, closing that door to outside air. The panel door closes the instrument panel outlets. The floor-defrost door opens the floor outlets. The blower does not operate and air does not pass through the system.

VENT - Outside air comes through the outside-recirculate air door. The panel door sends air to the instrument panel outlets (vacuum on motor). The temperature blend door controls the air through the heater core.

FLOOR - Outside air controlled by the temperature control lever passes through or around the heater core. The panel door closes and air is sent to the floor outlets (vacuum at ports A and B of the floor-defrost door vacuum motor).

FLR/DEF - The outside-recirculate air door lets in outside air (no vacuum at motor). Vacuum is applied to port A of the floor-defrost door. The door moves to mid-position and air is split between the floor and defrost outlets. The panel door closes.

DEFROST - With no vacuum at any vacuum motor, air passes through the outlets.




This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20