Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



2WD MODELS

1.Raise front of vehicle and support with stands. Support axle with a suitable jack. The axle must be supported when replacing spring and not be permitted to hang by brake hose. If length of brake hose is not sufficient to permit spring replacement, it will be necessary to remove the disc brake caliper. Do not suspend caliper by brake hose, if removed.
2.Disconnect shock absorber from lower mounting.
3.Remove spring upper retainer attaching bolts and the retainer.
4.Remove spring lower retainer attaching nut and the retainer.
5.Lower axle slowly and remove spring from vehicle.
6.Reverse procedure to install.

F-150 4WD MODELS & BRONCO

1.Raise and support vehicle.
2.Remove shock absorber to lower bracket attaching bolt.
3.Remove spring lower retainer attaching nuts from inside coil spring.
4.Remove spring upper retainer attaching screw and the upper retainer.
5.Place jack stands under frame side rails and lower axle to relieve spring tension. The axle must be supported when replacing spring and not be permitted to hang by the brake hose. If the length of the brake hose is not sufficient to permit spring replacement, it will be necessary to remove the disc brake caliper. Do not suspend caliper by brake hose, if removed.
6.Remove spring and lower retainer.
7.Reverse procedure to install.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20