Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



{tag}1285008348@
{tag}1285012118@


REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

{tag}1285016321@
{tag}1285021479@


INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
Ball Joint ServiceBall Joint Service

{tag}1285012118@


REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

{tag}1285016321@
{tag}1285021479@


INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
{tag}1285008348@
Ball Joint ServiceBall Joint Service



REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

{tag}1285016321@
{tag}1285021479@


INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
Ball Joint ServiceBall Joint Service

Ball Joint ServiceBall Joint Service



REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

{tag}1285016321@
{tag}1285021479@


INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
{tag}1285008348@
{tag}1285012118@


REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

Ball Joint ServiceBall Joint Service

{tag}1285021479@


INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
Ball Joint ServiceBall Joint Service

{tag}1285012118@


REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

Ball Joint ServiceBall Joint Service

{tag}1285021479@


INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
{tag}1285008348@
Ball Joint ServiceBall Joint Service



REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

Ball Joint ServiceBall Joint Service

{tag}1285021479@


INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
Ball Joint ServiceBall Joint Service

Ball Joint ServiceBall Joint Service



REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

Ball Joint ServiceBall Joint Service

{tag}1285021479@


INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
{tag}1285008348@
{tag}1285012118@


REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

{tag}1285016321@
Ball Joint ServiceBall Joint Service



INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
Ball Joint ServiceBall Joint Service

{tag}1285012118@


REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

{tag}1285016321@
Ball Joint ServiceBall Joint Service



INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
{tag}1285008348@
Ball Joint ServiceBall Joint Service



REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

{tag}1285016321@
Ball Joint ServiceBall Joint Service



INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
Ball Joint ServiceBall Joint Service

Ball Joint ServiceBall Joint Service



REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

{tag}1285016321@
Ball Joint ServiceBall Joint Service



INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
{tag}1285008348@
{tag}1285012118@


REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

Ball Joint ServiceBall Joint Service

Ball Joint ServiceBall Joint Service



INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
Ball Joint ServiceBall Joint Service

{tag}1285012118@


REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

Ball Joint ServiceBall Joint Service

Ball Joint ServiceBall Joint Service



INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
{tag}1285008348@
Ball Joint ServiceBall Joint Service



REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

Ball Joint ServiceBall Joint Service

Ball Joint ServiceBall Joint Service



INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly
Ball Joint ServiceBall Joint Service

Ball Joint ServiceBall Joint Service



REMOVE
1.Remove the spindle and ball joint assembly from the axle. Refer to Spindle/Service and Repair.
2.Install the spindle assembly in a vise and remove the snap ring from the lower ball joint. Remove the lower ball joint from the spindle using C-Frame Assembly T74P-3044-A 1 or equivalent and Receiver Cup D81T-3010-A or equivalent. Turn the forcing screw clockwise until the ball joint is removed from the spindle.
3.Assemble C-Frame Assembly and receiver cup on the upper ball joint, and turn forcing screw clockwise until ball joint is removed from the spindle.

NOTE: Always remove lower ball joint first.

CAUTION: Do not heat the ball joint or the spindle to aid in removal.

Ball Joint ServiceBall Joint Service

Ball Joint ServiceBall Joint Service



INSTALL

NOTE: Lower ball joint must be installed into the spindle first.

1.To install the lower ball joint, assemble C-Frame Assembly, Ball Joint Receiver Cup (D81T-3010-A5) and Installation Cup (D81T-30 10-A1 and D81T-3010-A3) or equivalents inside cup (D81T-3010-A4 or equivalent) in position on the spindle. Turn forcing screw clockwise until ball joint is seated.

CAUTION: Do not heat the ball joint or axle to aid in installation.

2.Install the snap ring onto the ball joint.
3.To install the upper ball joint, assemble the C-Frame in position on the spindle and repeat Step 1.
4.Install the spindle and ball joint assembly



This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20