Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



{tag}1187814644@



1.Connect starter as shown in Fig. 8.
2.Close switch K1 and check starter operation. Starter should operate smoothly.
3.If starter rotates slowly, check clearance between the armature and starter housing. Clearance should be .001-.020 inch. Clearance is determined by the shim behind the bearing in the end cover.Fig. 8 Starter No-Load Test ConnectionsFig. 8 Starter No-Load Test Connections




1.Connect starter as shown in Fig. 8.
2.Close switch K1 and check starter operation. Starter should operate smoothly.
3.If starter rotates slowly, check clearance between the armature and starter housing. Clearance should be .001-.020 inch. Clearance is determined by the shim behind the bearing in the end cover.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20