Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



{tag}1145815645@
1.Before installing the master cylinder, check the distance from the outer end of the booster assembly push rod, to the front face of the brake booster assembly. Turn the push rod adjusting screw in or out as required to obtain the specified length.
{tag}1145744261@
2.Position the master cylinder assembly over the booster push rod and onto the two studs on the booster assembly. Install the attaching nuts and tighten to 24-34 Nm (18-25 ft lbs).
3.Connect the hydraulic brake system lines to the master cylinder.
4.Connect fluid level indicator switch.
5.Bleed the master cylinder. Fill the reservoir of the master cylinder with heavy duty DOT 3 brake fluid to the fluid fill line. Install gasket and bleed the system. Refer to Brake Bleeding.

For additional information see Fundamentals and Basics. Bendix Booster Push Rod Gauge Dimensions and AdjustmentBendix Booster Push Rod Gauge Dimensions and Adjustment

1.Before installing the master cylinder, check the distance from the outer end of the booster assembly push rod, to the front face of the brake booster assembly. Turn the push rod adjusting screw in or out as required to obtain the specified length.
{tag}1145744261@
2.Position the master cylinder assembly over the booster push rod and onto the two studs on the booster assembly. Install the attaching nuts and tighten to 24-34 Nm (18-25 ft lbs).
3.Connect the hydraulic brake system lines to the master cylinder.
4.Connect fluid level indicator switch.
5.Bleed the master cylinder. Fill the reservoir of the master cylinder with heavy duty DOT 3 brake fluid to the fluid fill line. Install gasket and bleed the system. Refer to Brake Bleeding.

For additional information see Fundamentals and Basics. {tag}1145815645@
1.Before installing the master cylinder, check the distance from the outer end of the booster assembly push rod, to the front face of the brake booster assembly. Turn the push rod adjusting screw in or out as required to obtain the specified length.


2.Position the master cylinder assembly over the booster push rod and onto the two studs on the booster assembly. Install the attaching nuts and tighten to 24-34 Nm (18-25 ft lbs).
3.Connect the hydraulic brake system lines to the master cylinder.
4.Connect fluid level indicator switch.
5.Bleed the master cylinder. Fill the reservoir of the master cylinder with heavy duty DOT 3 brake fluid to the fluid fill line. Install gasket and bleed the system. Refer to Brake Bleeding.

For additional information see Fundamentals and Basics. Bendix Booster Push Rod Gauge Dimensions and AdjustmentBendix Booster Push Rod Gauge Dimensions and Adjustment

1.Before installing the master cylinder, check the distance from the outer end of the booster assembly push rod, to the front face of the brake booster assembly. Turn the push rod adjusting screw in or out as required to obtain the specified length.


2.Position the master cylinder assembly over the booster push rod and onto the two studs on the booster assembly. Install the attaching nuts and tighten to 24-34 Nm (18-25 ft lbs).
3.Connect the hydraulic brake system lines to the master cylinder.
4.Connect fluid level indicator switch.
5.Bleed the master cylinder. Fill the reservoir of the master cylinder with heavy duty DOT 3 brake fluid to the fluid fill line. Install gasket and bleed the system. Refer to Brake Bleeding.

For additional information see Fundamentals and Basics.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20