Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
{tag}1141261854@
-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
{tag}1141257584@
-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).
{tag}1141254085@

IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).
{tag}1138606194@
-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
{tag}1141251088@
-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
{tag}1141247924@
-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
{tag}1141244156@
-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).BASIC SERVICE
-Jack or lifting device.
-Safety stands.
-Lug nut wrench.
-Wire cutter (for removing cotter pins).
-Large C-clamp (for compressing the caliper piston).
Compressing The Caliper PistonCompressing The Caliper Piston

-Hammer and brass drift.
-Complete set of combination wrenches or sockets.
-Elastic cord or wire (for supporting calliper once it is removed).
Suspending The CaliperSuspending The Caliper

-Wire brush.
-Brake bleeding device;
-Pressure bleeder or
-Vacuum bleeder or
-One-man brake bleeder kit or
-Length of clear plastic hose (3/16 inch ID) and a glass jar.
Brake Bleeding Setup Brake Bleeding Setup

-Suction bulb (for removing brake fluid from reservoir).
-Drip pan.
-Clean shop towels.
-Torque wrench (0-120 lb. ft.)
-Disc brake micrometer (for measuring rotor thickness).


-Dial indicator (for measuring lateral runout).



IF CALIPER REBUILDING IS NECESSARY:
Removing The PistonRemoving The Piston

-Source of compressed air and air nozzle (for removing piston).
Installing The Caliper BootInstalling The Caliper Boot

-Caliper dust boot driver tool.
-Emery cloth (for cleaning inside of caliper).


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20