Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



INSPECTION

{tag}1033192176@


Position synchronizer on synchronizer body as shown in the Synchronizer Clearance Chart. Insert a suitable feeler gauge, then measure clearance at two opposite points. If clearance is less than 0.024 inch for 3rd/4th, 1st/2nd, and 5th synchronizer assemblies, and 0.008 inch for reverse synchronizer assembly, replace synchronizer ring, synchronizer body, or both. Check length of all synchronizer compression springs. Unloaded length of spring should measure 0.583 inch, O.D. should measure 0.235 inch, and wire diameter should measure 0.037 inch.



INSPECTION

Synchronizer Clearance ChartSynchronizer Clearance Chart



Position synchronizer on synchronizer body as shown in the Synchronizer Clearance Chart. Insert a suitable feeler gauge, then measure clearance at two opposite points. If clearance is less than 0.024 inch for 3rd/4th, 1st/2nd, and 5th synchronizer assemblies, and 0.008 inch for reverse synchronizer assembly, replace synchronizer ring, synchronizer body, or both. Check length of all synchronizer compression springs. Unloaded length of spring should measure 0.583 inch, O.D. should measure 0.235 inch, and wire diameter should measure 0.037 inch.






This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20