Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.


{tag}86681894@


3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.


{tag}86684052@


4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION


{tag}86686478@


{tag}86688596@


1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.






3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.


{tag}86684052@


4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION


{tag}86686478@


{tag}86688596@


1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.


{tag}86681894@


3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.






4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION


{tag}86686478@


{tag}86688596@


1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.






3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.






4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION


{tag}86686478@


{tag}86688596@


1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.


{tag}86681894@


3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.


{tag}86684052@


4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION






{tag}86688596@


1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.






3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.


{tag}86684052@


4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION






{tag}86688596@


1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.


{tag}86681894@


3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.






4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION






{tag}86688596@


1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.






3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.






4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION






{tag}86688596@


1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.


{tag}86681894@


3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.


{tag}86684052@


4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION


{tag}86686478@






1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.






3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.


{tag}86684052@


4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION


{tag}86686478@






1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.


{tag}86681894@


3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.






4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION


{tag}86686478@






1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.






3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.






4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION


{tag}86686478@






1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.


{tag}86681894@


3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.


{tag}86684052@


4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION










1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.






3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.


{tag}86684052@


4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION










1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.


{tag}86681894@


3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.






4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION










1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.


REMOVAL

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.

1.Disconnect the battery ground cable.
2.Remove the relay cover.






3.Disconnect the starter motor solenoid relay switch wires and cables.
1.Remove the insulator.
2.Disconnect the ignition switch signal wire.
3.Remove the nuts.
4.Remove the engine control sensor wire and the generator wire.
5.Remove the battery cables.






4.Remove the bolts and remove the starter motor solenoid relay switch.

INSTALLATION










1.Follow the removal procedure in reverse order.

WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT THE HEAVY GAUGE LEADS ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE THE PROTECTIVE CAPS ARE IN PLACE WHEN THE MAINTENANCE IS COMPLETE.





This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20