Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.

{tag}852470118@

4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.

{tag}852461130@

3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.

{tag}852301036@

3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.

{tag}852301036@

2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.

{tag}852311245@

4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY

{tag}852311245@

1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.

{tag}852456599@

2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY

{tag}852293473@

1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

{tag}852452176@


DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

{tag}852445984@
Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


{tag}852347821@
Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
{tag}852416357@

Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.
Special ToolSpecial Tool


Part 1 Of 3Part 1 Of 3

Part 2 Of 3Part 2 Of 3

Part 3 Of 3Part 3 Of 3



DISASSEMBLY




1.Remove the lower control valve body.
1Remove the bolts.
2Remove the lower control valve body.
3Remove the control valve body separator plate.




2.CAUTION: Note the location of the check balls prior to removal. If the check balls are not installed in their proper location shift problems will occur.

Remove the check balls.
1Remove three small check balls.
2Remove two large check balls.




3.Remove the control valves and springs from the upper main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.




4.Remove the control valves and springs from the lower main control valve body. Inspect the valves for nicks and burrs. If the valves are damaged the main control valve body will need to be replaced.
5.Inspect all valves, valve sleeves, valve bores for scores, nick or burrs. Check all fluid passages for obstructions. Inspect all mating surfaces for burrs and scores.
6.Inspect all springs for distortion. Check all valves and plungers for free movement in their respective bores. All the components when dry must fall from their own weight in their respective bores.
7.Roll the valves on a flat surface to check for bent or out-of-round condition.

ASSEMBLY




1.Install the control valves and springs from the lower main control valve body.




2.Install the control valves and springs from the upper main control valve body.




3.NOTE: Install the check balls.

1Install three small check balls.
2Install two large check balls.




4.Install the lower control valve body using aligning pins.
1Install aligning pins.
2Install the control valve body separator plate.
3Install the lower control valve body.
4Install the bolts.



This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20