Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



{tag}831459922@


{tag}848401050@

1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.

{tag}848403173@

2.Install the Converter Clutch Torquing Tool in the converter pump drive.

{tag}848405981@

3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

Special ToolsSpecial Tools



{tag}848401050@

1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.

{tag}848403173@

2.Install the Converter Clutch Torquing Tool in the converter pump drive.

{tag}848405981@

3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

{tag}831459922@





1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.

{tag}848403173@

2.Install the Converter Clutch Torquing Tool in the converter pump drive.

{tag}848405981@

3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

Special ToolsSpecial Tools






1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.

{tag}848403173@

2.Install the Converter Clutch Torquing Tool in the converter pump drive.

{tag}848405981@

3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

{tag}831459922@


{tag}848401050@

1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.




2.Install the Converter Clutch Torquing Tool in the converter pump drive.

{tag}848405981@

3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

Special ToolsSpecial Tools



{tag}848401050@

1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.




2.Install the Converter Clutch Torquing Tool in the converter pump drive.

{tag}848405981@

3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

{tag}831459922@





1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.




2.Install the Converter Clutch Torquing Tool in the converter pump drive.

{tag}848405981@

3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

Special ToolsSpecial Tools






1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.




2.Install the Converter Clutch Torquing Tool in the converter pump drive.

{tag}848405981@

3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

{tag}831459922@


{tag}848401050@

1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.

{tag}848403173@

2.Install the Converter Clutch Torquing Tool in the converter pump drive.




3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

Special ToolsSpecial Tools



{tag}848401050@

1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.

{tag}848403173@

2.Install the Converter Clutch Torquing Tool in the converter pump drive.




3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

{tag}831459922@





1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.

{tag}848403173@

2.Install the Converter Clutch Torquing Tool in the converter pump drive.




3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

Special ToolsSpecial Tools






1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.

{tag}848403173@

2.Install the Converter Clutch Torquing Tool in the converter pump drive.




3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

{tag}831459922@


{tag}848401050@

1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.




2.Install the Converter Clutch Torquing Tool in the converter pump drive.




3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

Special ToolsSpecial Tools



{tag}848401050@

1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.




2.Install the Converter Clutch Torquing Tool in the converter pump drive.




3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

{tag}831459922@





1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.




2.Install the Converter Clutch Torquing Tool in the converter pump drive.




3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.

Special ToolsSpecial Tools






1.Insert the Converter Clutch Holding Tool in one of the grooves in the stator thrust washer.




2.Install the Converter Clutch Torquing Tool in the converter pump drive.




3.Using (A) torque wrench, turn the (B) Converter Clutch Torquing Tool counterclockwise while holding the (C) Converter Clutch Holding Tool.
-The converter one-way clutch should lock up and hold the specified torque.
-The torque converter one-way clutch should rotate freely in the clockwise direction.
-Try the clutch for lockup and hold in at least five positions.
-If the clutch fails to lock up and hold the specified torque, replace the torque converter.




This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20