Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.

{tag}728110733@

3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.

{tag}728106924@

2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION

{tag}728104522@

1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.

{tag}728100167@

4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.

{tag}728095776@

3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.

{tag}728093417@

2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.
REMOVAL

1.WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO CAN RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS, WHICH CAN RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

Raise and support the vehicle.




2.Disconnect the shift motor electrical connector.




3.Remove the coil wire from the transfer case shift motor electrical connector.
1Remove the wire connector spacer.
2Remove the coil wire and pin.
-Use proper electrical connector pin remover.




4.Remove the transfer case shift motor.
1Remove the four bolts.
2Remove the transfer case shift motor.

INSTALLATION




1.Install the transfer case shift motor.
1Position the transfer case shift motor.
2Install the four bolts.




2.Install the coil wire into the transfer case shift motor electrical connector.
1Install the coil wire and pin.
2Install the wire connector spacer.




3.Connect the electric shift motor electrical connector.

4.NOTE: If equipped with air suspension, reactivate the system by turning on the air suspension switch.

Lower the vehicle.



This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20