Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.

{tag}337237696@

7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.

{tag}337235960@

6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.

{tag}337209514@

5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.

{tag}337233881@

2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.

{tag}337231245@

1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.CAUTION:
^The cylinder head must be removed from the engine before installing a tapersert. If this procedure is done with the cylinder head on the engine, the cylinder walls can be damaged by metal chips produced by the thread cutting process.
^Do not use power or air-driven tools for installing taperserts. Cylinder head damage may occur.

NOTE: This repair is permanent and will have no effect on cylinder head or spark plug life.




1.Clean the spark plug seat and threads.




2.Start the tap into the spark plug hole, being careful to keep it properly aligned. As tap begins to cut new threads, apply aluminum cutting oil.
3.Continue cutting the threads and applying oil until the stop ring bottoms against the spark plug seat.
4.Remove the tap and metal chips.




5.Coat the threads of the mandrel with cutting oil. Thread the tapersert onto the mandrel until one thread of the mandrel extends beyond the tapersert.

NOTE: A properly installed tapersert will be either flush with or just below the spark plug gasket seat.




6.Tighten the tapersert into the spark plug hole.




7.Turn the mandrel body approximately one-half turn counterclockwise and remove.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20