Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



TEST DESCRIPTION
Excessive radial and lateral runout of a wheel and tire assembly can cause roughness, vibration, wheel tramp, tire wear, and steering wheel tremor.

Before checking runout and to avoid false readings caused by temporary flat spots in the tires, check runout only after the vehicle has been driven far enough to warm tires.

The extent of the runout is measured with Radial Runout Gauge. All measurements are made on the vehicle with the tires inflated to recommended inflation pressures and with the front wheel bearings adjusted to specifications.

TIRE RUNOUT

{tag}263045268@

Use Radial Runout Gauge to measure (A) radial runout of the tire at the center and outside ribs of the tread face. Mark the high points of radial runout for future reference. Radial runout should not exceed specifications.

WHEEL RUNOUT

{tag}263042221@

Measure (B) radial and (C) lateral wheel runout at the positions shown. Runout should not exceed specifications.


TEST DESCRIPTION
Excessive radial and lateral runout of a wheel and tire assembly can cause roughness, vibration, wheel tramp, tire wear, and steering wheel tremor.

Before checking runout and to avoid false readings caused by temporary flat spots in the tires, check runout only after the vehicle has been driven far enough to warm tires.

The extent of the runout is measured with Radial Runout Gauge. All measurements are made on the vehicle with the tires inflated to recommended inflation pressures and with the front wheel bearings adjusted to specifications.

TIRE RUNOUT




Use Radial Runout Gauge to measure (A) radial runout of the tire at the center and outside ribs of the tread face. Mark the high points of radial runout for future reference. Radial runout should not exceed specifications.

WHEEL RUNOUT

{tag}263042221@

Measure (B) radial and (C) lateral wheel runout at the positions shown. Runout should not exceed specifications.


TEST DESCRIPTION
Excessive radial and lateral runout of a wheel and tire assembly can cause roughness, vibration, wheel tramp, tire wear, and steering wheel tremor.

Before checking runout and to avoid false readings caused by temporary flat spots in the tires, check runout only after the vehicle has been driven far enough to warm tires.

The extent of the runout is measured with Radial Runout Gauge. All measurements are made on the vehicle with the tires inflated to recommended inflation pressures and with the front wheel bearings adjusted to specifications.

TIRE RUNOUT

{tag}263045268@

Use Radial Runout Gauge to measure (A) radial runout of the tire at the center and outside ribs of the tread face. Mark the high points of radial runout for future reference. Radial runout should not exceed specifications.

WHEEL RUNOUT




Measure (B) radial and (C) lateral wheel runout at the positions shown. Runout should not exceed specifications.


TEST DESCRIPTION
Excessive radial and lateral runout of a wheel and tire assembly can cause roughness, vibration, wheel tramp, tire wear, and steering wheel tremor.

Before checking runout and to avoid false readings caused by temporary flat spots in the tires, check runout only after the vehicle has been driven far enough to warm tires.

The extent of the runout is measured with Radial Runout Gauge. All measurements are made on the vehicle with the tires inflated to recommended inflation pressures and with the front wheel bearings adjusted to specifications.

TIRE RUNOUT




Use Radial Runout Gauge to measure (A) radial runout of the tire at the center and outside ribs of the tread face. Mark the high points of radial runout for future reference. Radial runout should not exceed specifications.

WHEEL RUNOUT




Measure (B) radial and (C) lateral wheel runout at the positions shown. Runout should not exceed specifications.





This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20