Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



REMOVAL


{tag}189557132@


1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).


{tag}189594376@


2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.


{tag}189597830@


3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.


{tag}189600010@


INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL






1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).


{tag}189594376@


2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.


{tag}189597830@


3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.


{tag}189600010@


INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL


{tag}189557132@


1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).






2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.


{tag}189597830@


3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.


{tag}189600010@


INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL






1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).






2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.


{tag}189597830@


3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.


{tag}189600010@


INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL


{tag}189557132@


1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).


{tag}189594376@


2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.






3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.


{tag}189600010@


INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL






1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).


{tag}189594376@


2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.






3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.


{tag}189600010@


INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL


{tag}189557132@


1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).






2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.






3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.


{tag}189600010@


INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL






1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).






2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.






3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.


{tag}189600010@


INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL


{tag}189557132@


1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).


{tag}189594376@


2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.


{tag}189597830@


3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.






INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL






1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).


{tag}189594376@


2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.


{tag}189597830@


3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.






INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL


{tag}189557132@


1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).






2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.


{tag}189597830@


3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.






INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL






1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).






2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.


{tag}189597830@


3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.






INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL


{tag}189557132@


1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).


{tag}189594376@


2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.






3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.






INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL






1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).


{tag}189594376@


2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.






3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.






INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL


{tag}189557132@


1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).






2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.






3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.






INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.
REMOVAL






1.Loosen the screw and separate the air cleaner outlet tube from the engine Air Cleaner (ACL).






2.Disconnect the Mass Air Flow (MAF) sensor connector from the engine control sensor extension wiring and release the air cleaner clamp.






3.Remove the outlet side of the engine air cleaner.
4.Remove the mass air flow sensor from the outlet side of the engine air cleaner.






INSTALLATION

CAUTION: The grommet used to seal the engine air cleaner housing at the extension must be fully seated. Failure to do so will result in unmetered air entering the engine.

NOTE: Use the alignment notch to properly align the inlet side and outlet side of the engine air cleaner.

1.Follow the removal procedure in reverse order.



This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20