Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



ELECTRONIC DOOR LOCK CONTROL SYSTEM

{tag}23519233@


NOTE: The remote entry features will not function when the ignition switch is in the RUN or ACC position.

The electronic door lock system consists of the Remote Anti-theft Personality (RAP) module and the three-button (hand held) keyless entry remote transmitter.

The keyless entry remote transmitter initiates the following electronic door lock and memory (Navigator only) system functions:
^Unlocks the driver door.
^Unlocks the driver door and moves the memory seat and mirrors into their corresponding memory positions. (Only available with the remote memory feature).
^Unlocks all doors.
^Locks all doors.
^Enables the panic alarm.
^Turns on the interior lamps when unlocking and off when locking.
^Chirps the horn once when the LOCK button on the keyless entry remote transmitter is pressed twice and all doors are closed.
^Chirps the horn twice when the LOCK button on the keyless entry remote transmitter is pressed twice and a door is left open.
^Allows up to four keyless entry remote transmitters to be programmed.

NOTE: If more than five seconds have elapsed since the first press of the UNLOCK button, pressing the UNLOCK button again will only unlock the driver door a second time.

To unlock the driver door press the UNLOCK button on the keyless entry remote transmitter.

To unlock all doors press the UNLOCK button on the keyless entry remote transmitter a second time, within five seconds of the first unlock.

To lock all doors press the LOCK button on the keyless entry remote transmitter once.

To confirm that the doors have been locked press the LOCK button again, within five seconds of the first press. The horn will chirp once if the doors have locked and all doors are closed. The horn will chirp twice if a door is still open.

To activate the panic alarm press the red PANIC button on the keyless entry remote transmitter. The horn will sound and the headlamps and exterior lamps will flash for a maximum of two minutes and 45 seconds.

To deactivate the panic alarm press the red PANIC button again on the keyless entry remote transmitter or turn the ignition switch to RUN/ACC.

NOTE: Doors will not lock if vehicle is started in neutral and passed into any forward gear.

If the autolock feature is enabled, the autolock feature will activate when the ignition switch is in the RUN/ACC position, the shift control selector is passed into or through the REVERSE position and all doors are closed when the driver releases the brake pedal.

After the initial lock, all doors will automatically relock when any door is opened and then closed followed by the release of the brake pedal. However, the doors will not relock if the ignition switch is in the OFF position.

The door may not automatically lock if the vehicle is shifted quickly into gear after starting the engine.

Enable/Disable Mode
The enable/disable mode allows the autolock and memory seat/mirror (Navigator only) features to be turned off and on. There are PIDS in RAP (Autolock and MEM-SEAT) which reflect if the feature is ON or OFF. The RAP Active Command Module Configuration can be used to turn "Autolock" on/off and turn "Move MEM-SEAT w/Key fob" on/off or the enable/disable mode is entered when the following series of steps is performed:
1.Close all of the doors.
2.Confirm that the ignition switch is in the OFF position.

NOTE: Steps 3 through 7 must be performed within 30 seconds.

3.Turn the ignition switch from OFF to RUN.
4.Press the power door lock UNLOCK button three times.
5.Turn the ignition switch from RUN to OFF.
6.Press the power door lock UNLOCK button three times.
7.Turn the ignition switch from OFF to RUN.
8.Verify that the RAP module chirps the horn. This indicates that the RAP module is now in the enable/disable mode and ready to accept program changes.
9.To change Autolock press the power door lock UNLOCK button one time to command the RAP module to toggle the autolock feature ON or OFF.
10.To change if the memory seat/mirrors will move when the keyfob unlock button is pressed, press the power door lock unlock button two times.
11.Press the power door lock LOCK button once to enter the command.
12.Verify that the vehicle horn chirps one time (Autolock feature) or two short chirps (memory seat recall feature) to signal the RAP module confirmation of the command. There should only be one chirp (Autolock feature) or two short chirps (memory seat recall feature) indicating that the feature has been disabled. If one chirp (for Autolock) or two chirps (for Memory Seat) is heard, followed by a longer honk, the feature has just been enabled. Return to step 9.
13.Turn the ignition switch to the OFF position to exit the enable/disable mode.
14.Verify that the RAP module chirps the horn once to indicate that a feature has been changed.

The RAP module remembers its setting any time battery power is interrupted.ELECTRONIC DOOR LOCK CONTROL SYSTEM





NOTE: The remote entry features will not function when the ignition switch is in the RUN or ACC position.

The electronic door lock system consists of the Remote Anti-theft Personality (RAP) module and the three-button (hand held) keyless entry remote transmitter.

The keyless entry remote transmitter initiates the following electronic door lock and memory (Navigator only) system functions:
^Unlocks the driver door.
^Unlocks the driver door and moves the memory seat and mirrors into their corresponding memory positions. (Only available with the remote memory feature).
^Unlocks all doors.
^Locks all doors.
^Enables the panic alarm.
^Turns on the interior lamps when unlocking and off when locking.
^Chirps the horn once when the LOCK button on the keyless entry remote transmitter is pressed twice and all doors are closed.
^Chirps the horn twice when the LOCK button on the keyless entry remote transmitter is pressed twice and a door is left open.
^Allows up to four keyless entry remote transmitters to be programmed.

NOTE: If more than five seconds have elapsed since the first press of the UNLOCK button, pressing the UNLOCK button again will only unlock the driver door a second time.

To unlock the driver door press the UNLOCK button on the keyless entry remote transmitter.

To unlock all doors press the UNLOCK button on the keyless entry remote transmitter a second time, within five seconds of the first unlock.

To lock all doors press the LOCK button on the keyless entry remote transmitter once.

To confirm that the doors have been locked press the LOCK button again, within five seconds of the first press. The horn will chirp once if the doors have locked and all doors are closed. The horn will chirp twice if a door is still open.

To activate the panic alarm press the red PANIC button on the keyless entry remote transmitter. The horn will sound and the headlamps and exterior lamps will flash for a maximum of two minutes and 45 seconds.

To deactivate the panic alarm press the red PANIC button again on the keyless entry remote transmitter or turn the ignition switch to RUN/ACC.

NOTE: Doors will not lock if vehicle is started in neutral and passed into any forward gear.

If the autolock feature is enabled, the autolock feature will activate when the ignition switch is in the RUN/ACC position, the shift control selector is passed into or through the REVERSE position and all doors are closed when the driver releases the brake pedal.

After the initial lock, all doors will automatically relock when any door is opened and then closed followed by the release of the brake pedal. However, the doors will not relock if the ignition switch is in the OFF position.

The door may not automatically lock if the vehicle is shifted quickly into gear after starting the engine.

Enable/Disable Mode
The enable/disable mode allows the autolock and memory seat/mirror (Navigator only) features to be turned off and on. There are PIDS in RAP (Autolock and MEM-SEAT) which reflect if the feature is ON or OFF. The RAP Active Command Module Configuration can be used to turn "Autolock" on/off and turn "Move MEM-SEAT w/Key fob" on/off or the enable/disable mode is entered when the following series of steps is performed:
1.Close all of the doors.
2.Confirm that the ignition switch is in the OFF position.

NOTE: Steps 3 through 7 must be performed within 30 seconds.

3.Turn the ignition switch from OFF to RUN.
4.Press the power door lock UNLOCK button three times.
5.Turn the ignition switch from RUN to OFF.
6.Press the power door lock UNLOCK button three times.
7.Turn the ignition switch from OFF to RUN.
8.Verify that the RAP module chirps the horn. This indicates that the RAP module is now in the enable/disable mode and ready to accept program changes.
9.To change Autolock press the power door lock UNLOCK button one time to command the RAP module to toggle the autolock feature ON or OFF.
10.To change if the memory seat/mirrors will move when the keyfob unlock button is pressed, press the power door lock unlock button two times.
11.Press the power door lock LOCK button once to enter the command.
12.Verify that the vehicle horn chirps one time (Autolock feature) or two short chirps (memory seat recall feature) to signal the RAP module confirmation of the command. There should only be one chirp (Autolock feature) or two short chirps (memory seat recall feature) indicating that the feature has been disabled. If one chirp (for Autolock) or two chirps (for Memory Seat) is heard, followed by a longer honk, the feature has just been enabled. Return to step 9.
13.Turn the ignition switch to the OFF position to exit the enable/disable mode.
14.Verify that the RAP module chirps the horn once to indicate that a feature has been changed.

The RAP module remembers its setting any time battery power is interrupted.


This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20