Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



{tag}1366890198@


SPECIAL TOOL(S)

1.Measure the length of the damaged area of the mini-tube vacuum hose.
2.Cut a piece of standard 3-mm (0.125-inch) inner diameter vacuum hose approximately 25 mm (1 inch longer than the damaged area of the mini-tube vacuum hose.
3.Cut off the mini-tube vacuum hose on each side of the damaged area.
4.Dip the mini-tube hose ends in commercially available paint thinner containing Methyl Ethyl Ketone (MEK). This solvent will seal the mini-tube in the vacuum hose.

WARNING: READ THE WARNING INFORMATION ON THE PRODUCT LABEL.


{tag}1366891449@


5.Insert the ends of the mini-tube vacuum hose approximately 9 mm (0.375 inch) into the ends of the standard 3-mm (0.125-inch) service vacuum hose section.
6.Shake the service joint after assembly to ensure the solvent is dispersed and the vacuum line is not plugged.
7.Test the system for a vacuum leak in the repair area.
-Use the Vacuum Tester or equivalent.
Vacuum Tester KitVacuum Tester Kit



SPECIAL TOOL(S)

1.Measure the length of the damaged area of the mini-tube vacuum hose.
2.Cut a piece of standard 3-mm (0.125-inch) inner diameter vacuum hose approximately 25 mm (1 inch longer than the damaged area of the mini-tube vacuum hose.
3.Cut off the mini-tube vacuum hose on each side of the damaged area.
4.Dip the mini-tube hose ends in commercially available paint thinner containing Methyl Ethyl Ketone (MEK). This solvent will seal the mini-tube in the vacuum hose.

WARNING: READ THE WARNING INFORMATION ON THE PRODUCT LABEL.


{tag}1366891449@


5.Insert the ends of the mini-tube vacuum hose approximately 9 mm (0.375 inch) into the ends of the standard 3-mm (0.125-inch) service vacuum hose section.
6.Shake the service joint after assembly to ensure the solvent is dispersed and the vacuum line is not plugged.
7.Test the system for a vacuum leak in the repair area.
-Use the Vacuum Tester or equivalent.
{tag}1366890198@


SPECIAL TOOL(S)

1.Measure the length of the damaged area of the mini-tube vacuum hose.
2.Cut a piece of standard 3-mm (0.125-inch) inner diameter vacuum hose approximately 25 mm (1 inch longer than the damaged area of the mini-tube vacuum hose.
3.Cut off the mini-tube vacuum hose on each side of the damaged area.
4.Dip the mini-tube hose ends in commercially available paint thinner containing Methyl Ethyl Ketone (MEK). This solvent will seal the mini-tube in the vacuum hose.

WARNING: READ THE WARNING INFORMATION ON THE PRODUCT LABEL.






5.Insert the ends of the mini-tube vacuum hose approximately 9 mm (0.375 inch) into the ends of the standard 3-mm (0.125-inch) service vacuum hose section.
6.Shake the service joint after assembly to ensure the solvent is dispersed and the vacuum line is not plugged.
7.Test the system for a vacuum leak in the repair area.
-Use the Vacuum Tester or equivalent.
Vacuum Tester KitVacuum Tester Kit



SPECIAL TOOL(S)

1.Measure the length of the damaged area of the mini-tube vacuum hose.
2.Cut a piece of standard 3-mm (0.125-inch) inner diameter vacuum hose approximately 25 mm (1 inch longer than the damaged area of the mini-tube vacuum hose.
3.Cut off the mini-tube vacuum hose on each side of the damaged area.
4.Dip the mini-tube hose ends in commercially available paint thinner containing Methyl Ethyl Ketone (MEK). This solvent will seal the mini-tube in the vacuum hose.

WARNING: READ THE WARNING INFORMATION ON THE PRODUCT LABEL.






5.Insert the ends of the mini-tube vacuum hose approximately 9 mm (0.375 inch) into the ends of the standard 3-mm (0.125-inch) service vacuum hose section.
6.Shake the service joint after assembly to ensure the solvent is dispersed and the vacuum line is not plugged.
7.Test the system for a vacuum leak in the repair area.
-Use the Vacuum Tester or equivalent.



This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20