Yandex MC
Alldata online

Alldata online. Is free

DATACENTER ERROR!!! Внимание! Авария в датацентре!!


Subscribe to the telegram channel https://t.me/kolhosniki_en

Place for your advertisement

predsedatel@kolhosniki.ru
Click for start

Diagnosis and repair



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.

{tag}1341979627@

2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION

{tag}1341977135@

1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.

{tag}1341971656@

4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.

{tag}1341925602@

3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.

{tag}1341968032@

2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.



REMOVAL
1.Raise and support the vehicle.

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING, JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE OPERATIONS.




2.Make preliminary adjustment references.
(1)Make an alignment mark on the torsion bar and the torsion bar crossmember support.
(2)Measure and record the length.




3.Relieve the torsion bar tension.
(1)Remove the torsion bar adjuster bolt.
(2)Install Torsion Bar Tool with Torsion Bar Tool Adapters in the B slots on Torsion Bar Tool.
(3)Tighten Torsion Bar Tool until the torsion bar adjuster lifts off of the adjuster nut.
(4)Remove the torsion bar adjuster nut.
(5)Remove Torsion Bar Tool.
(6)Remove the torsion bar adjuster.




4.Remove the torsion bars.
(1)Remove the torsion bar crossmember support bolts and nuts.
(2)Remove the torsion bar crossmember support.
(3)Remove the torsion bars.

INSTALLATION




1.Install the torsion bar.
(1)Position the torsion bars.
(2)Position the torsion bar crossmember support.
(3)Install the torsion bar crossmember support bolts and nuts.




2.Load the torsion bar.
(1)Install the torsion bar adjuster.
(2)Install Torsion Bar Tool with torsion Bar Tool Adapters in the B slots on the torsion bar tool.
(3)Tighten Torsion Bar Tool to load the torsion bar.
(4)Install the torsion bar adjuster nut.
(5)Install the torsion bar adjuster bolt.
(6)Remove Torsion Bar Tool.

3.Adjust the ride height.






This project exists mainly due to the display of advertising.

Due to the international situation, making a profit from advertising has become impossible.

If this continues, then the project will either close completely, or become closed and paid.

To support the project, you can Buy a paid subscription


Can be closed in 20